Harmony 550 | User Manual |
|
|
To resynchronize:
1. Press the Help button.
2.Answer the questions on the remote’s display by selecting Yes or No. If you answer no to any question, the Harmony remote will resend the necessary command and ask you the same question again.
When you are done, the Harmony remote will be "in sync" with your devices again.
Types of Help Available
You can customize the Help button on your Harmony remote to provide one of the following types of help:
•Smart help
Asks questions about the devices that are on during a specific Activity.
•Full help
Asks questions about all the devices in your help system.
Select Full help if you find devices that aren’t being controlled the way you want them to, and the help on the remote is not asking you questions about these devices.
To select the type of help you want:
1.Connect your Harmony remote to your computer to start the Harmony remote control software.
2.Click Remote Preferences.
3.Select Settings.
4.Click Next.
Using the Remote Assistant
Extra help is available from your remote by turning on the Remote Assistant.
To turn on/off this feature using the remote control software:
1.From Home in the Harmony control software, click Remote Preferences.
2.Select Settings.
3.Click Next.
v. 1.1 | page 5 |