Logitech 1100 user manual Testing your setup -- Starting an Activity

Page 17

Testing your setup

Every time you update your Harmony 1100, you should test your remote to make sure it’s working the way you expect. This chapter gives you the information you need to test your remote. It also has some suggestions on what to check while you’re testing your setup.

If you run into speciﬁc issues while testing your remote, refer to the Troubleshooting section of this manual for suggestions and possible ﬁxes for your problems.

The process of testing your Harmony 1100 is straightforward. It involves simply trying the Activities you use most often and then using the on-remote help to correct any issues.

In some cases, you may need to return to the Harmony Remote Software to make changes to your remote’s setup to ensure the remote is working the way you want.

To begin testing your remote:

1.Ensure all the devices in your entertainment system are turned off.

2.Disconnect the USB cable from your remote.

If this is the ﬁrst time you’ve updated your remote, the Harmony 1100 tutorial will start on the remote’s screen.

3.Follow the instructions displayed on the remote’s screen.

4.Go to your entertainment system and try each of your Activities.

For tips on what to look for when starting an Activity, or switching between Activities, see the tips in this chapter.

If an Activity doesn’t start correctly, press the Help button on the remote and the on-remote help will get you back “in sync”. After you ﬁnish testing your Activities, be sure to re-test any for which you had to use the Help.

Testing your setup -- Starting an Activity

Look for these things in particular:

•Did all of your devices for that Activity turn on?

•Do you hear the correct sound?

•If the Activity includes your TV, do you see the correct picture?

Testing your setup -- Switching between Activities

Look for these things in particular:

•Are all devices needed for this new Activity on?

•Did devices not needed for this Activity turn off?

•Do you hear the correct sound?

•If the Activity includes your TV, do you see the correct picture?

17

Image 17

Contents Version Contents Figuring out which inputs your system uses Page Introduction Buttons on your Harmony Navigation icons Favorite Channels Commands common to your ActivityActivities DevicesStatus icons AB CTurning off your devices Switching between ActivitiesSelecting an Activity Using the Help button Charging your remote Controlling your devices individuallyOverview of the setup process Setting up your Harmony 1100 for the ﬁrst timeGathering your device information Locating manufacturer and model number on your devicesClick Create New Account Connecting your Harmony 1100 to your computerAdding new devices at a later time Setting up the devices you want to controlSetting up Activities for your Harmony Updating the remote Testing your setup -- Switching between Activities Testing your setupTesting your setup -- Starting an Activity Adding and changing your Activities Changing your setupRenaming an Activity Adding and changing your devicesAdding an extra device passthrough to an Activity Customizing the on-remote help Select the Remote Settings tab Click Display SettingsControlling the Remote Assistant Smart HelpPage Click Re-order Activities Select Set up Favorite ChannelsClick Customize Buttons Favorite channel iconsNaming buttons that appear on the remote’s screen Click the Remote Settings tab Click Set Up a SlideshowSetting a background Changing the backlight settingsSelect Remote Settings Select Backlight Select the Remote Settings tab Select Set a backgroundNaming conventions Adding additional features to your HarmonyNaming a new command your remote learned Power On Delay Types of delays or speed settingsInter-Key Delay Input DelayInter-Device Delay Adjusting the delay between IR commands speed settingsSelect Adjust the delays speed settings RepeatsMaintaining your Harmony Testing your remote settings after a remote upgradeTV doesn’t go to the right input when starting Activities Troubleshooting problems with your HarmonyPage Option 2 Several source buttons Option 1 One source buttonOption 4 Select the source from a list Turn on all your devicesOption 3 Select the input from an on-screen menu Listen to the sound Watch the TVLights on the RF Wireless Extender RF Wireless ExtenderClick the Remote Settings tab Click Manage Remotes Setting up the RF Wireless ExtenderControlling a device with the Harmony remote Controlling a device with the RF Wireless ExtenderFinding where to place the emitters Installing the RF Wireless ExtenderUsing the Emitters Attaching the emitters Click Remote Settings Click Manage Remotes Adding additional RF Wireless ExtendersRemoving the RF Wireless Extender from your network Getting help with your Harmony remote Getting help with your online setupContacting Customer Support Finding answers to questionsLogitech’s Harmony Remote user forums Using the On-Remote HelpAppendix a Device Information Appendix B Glossary Receiver Passthrough Personal Video Recorder PVRPre-ampliﬁer Pre-amp Sound Processing Stereo receiver Tuner Power strip Appendix C Product Speciﬁcation

Related manuals

Manual 48 pages 28.38 Kb

Manual 48 pages 62.86 Kb