TUNING TV CHANNELS
SCAN CHANNELS
1.Select the option PVR CONTROL inside the Menu for Configuration to carry out the tuning . Remember to configure the correct input format before carrying out this operation.
2.Select the option TUNER CONTROL.
3.The previous option offers two possibilities. Select AUTOSCAN and ENTER to confirm. ENTER again and the TV carries out the Automatic Tuning. While this is carried out a blue line that will be shown moving left to right.
4.VLH, VHF and UHF will be shown. The number of channels will be shown on screen after the tuning.
5.If you want to receive TV programs press W to return to the top menu. Then select LIVE TV) and press the VIDEO IN button) to choose RF and to receive TV
CHOOSE TV CHANNEL
SEARCHING FOR CHANNELs
If the signal or the color is poor, the user can modify the configuration to carry out another search or skip a channel.
Steps:
1.When in TUNER CONTROL, press CHANNEL SETUP to enter.
2.Use the S T to select the channel and ENTER to confirm (X will be shown on the screen).
3.Press the X to exit once it has finished.
CHANNEL ADJUSTMENT
If the signal is not good or the color is poor, adjust the tuning using X and W.
NOTE: If signal is weak, the message “No signal“ it will be shown on screen or the image disappears. Press the button SETUP to reach the system menu. Press SETUP again to leave this menu. This will make that the unit retune.
Page 33 of 46