General Description Typical Nameplate | Stearns 1-056-X00 instruction

®		P/N 8-078-905-60
®
	Spring-Set Disc Brakes	effective 03/16/06
		effective 03/16/06

							For replacement parts refer to sheets:
Installation and Service Instructions							For replacement parts refer to sheets:
							Series	Sheet Part No.
							1-056-000	8-078-906-00
for 1-056-X00* Series (all revisions)							1-056-100	8-078-906-01
							1-056-200	8-078-906-02
							1-056-300	8-078-906-03
Manual Adjust Brakes							1-056-300	8-078-906-03
							1-056-400	8-078-906-04
							1-056-500	8-078-906-05
*This sheet includes Series 1-056,000; 1-056,100; 1-056,200;							1-056-500	8-078-906-05
							1-056-600	8-078-906-06
1-056,300; 1-056,400; 1-056,500; 1-056,600 and 1-056,900.							1-056-600	8-078-906-06
1-056,300; 1-056,400; 1-056,500; 1-056,600 and 1-056,900.							1-056-900	8-078-906-09
For other series consult factory.							1-056-900	8-078-906-09
For other series consult factory.							Also available at www.rexnord.com

1-056-100
1-056-100
1-056-
1-056-	600						a) Wear a filtered mask or a respirator
			1-056-000				while removing dust from the inside
			1-056-400				of a brake.
			1-056-500				b) Use a vacuum cleaner or a soft
							b) Use a vacuum cleaner or a soft
							brush to remove dust from the

1-056-200
1-056-200							brake. When brushing, avoid caus-
1-056-		900					brake. When brushing, avoid caus-
1-056-		900					ing the dust to become airborne.
							ing the dust to become airborne.
							Collect the dust in a container, such
							as a bag, which can be sealed off.
							10. Caution! While the brake is
1-056-300							equipped with a manual release to
							allow manual shaft rotation, the
				Tools required for installation and servicing:			allow manual shaft rotation, the
				3/8” hex wrench	5/16” nut driver		motor should not be run with the
				3/8” hex wrench	5/16” nut driver		manual release engaged, to avoid
				5/16” hex wrench	1/4” screwdriver		manual release engaged, to avoid
				5/16” hex wrench	1/4” screwdriver		overheating the friction disc(s).
				3/16” hex wrench	8” adjustable wrench		overheating the friction disc(s).
						General Description

Typical Nameplate

Important

Please read these instructions carefully before installing, operating, or servicing your Stearns Brake. Failure to comply with these instructions could cause injury to personnel and/or damage to property if the brake is installed or operated incor- rectly. For definition of limited warranty/lia- bility, contact Rexnord Industries, LLC, Stearns Division,5150 S. International Dr., Cudahy, WI 53110, (414) 272-1100.

Caution

1.Installation and servicing must be made in compliance with all local safety codes including Occupational Safety and Health Act (OSHA). All wiring and electrical connections must comply with the National Electric Code (NEC) and local electric codes in effect.

2.Do not operate the brake in atmospheres containing explosive gases or dusts.

3.To prevent an electrical hazard, disconnect power source before working on the brake. If power disconnect point is out of sight, lock disconnect in the off position and tag to prevent accidental application of power.

4.Make certain power source conforms to the requirements specified on the brake nameplate.

5.Be careful when touching the exterior of an operating brake. Allow sufficient time for brake to cool before disassembly. Surfaces may be hot enough to be painful or cause injury.

6.Do not operate brake with housing removed. All moving parts should be guarded.

7.Installation and servicing should be performed only by qualified personnel familiar with the construction and oper- ation of the brake.

8.For proper performance and operation, only genuine Stearns parts should be used for repairs and replacements.

9.After usage, the brake interior will con- tain burnt and degraded friction mate- rial dust. This dust must be removed before servicing or adjusting the brake.

DO NOT BLOW OFF DUST using an air hose. It is important to avoid dispersing dust into the air or inhaling it, as this may be dangerous to your health.

These series of brakes are spring-set, electrically released. They contain one or more rotating friction discs (4) driven by a hub (16) mounted on the motor or other shaft.

Operating Principle

These series contain one or more friction discs (4) assembled alternately between the endplate (2) friction surface, stationary disc(s) (3) and pressure plate (also called stationary disc) (3). The stationary disc(s) are restrained from rotating by being keyed into the endplate. With the brake released, all disc pack components are free to slide axially and the friction disc(s) to rotate.

Brake release occurs when the solenoid coil is electrically energized, causing the solenoid plunger to travel a specified distance and through a lever system, overcoming the pressure spring force. This action releases the clamping force on the disc pack, thereby allowing the friction disc(s) and brake hub to rotate.

Brake sets and torque is produced when electric current to the solenoid coil is interrupted, thereby collapsing the solenoid magnetic field. The solenoid plunger returns to its original de-energized position allowing the lever arm to move forward by virtue of the compressed torque springs. This action compresses the disc pack components which applies a retarding torque to the brake hub and ultimately restores the brake to a spring-set static condition.

1-056-X00 specifications

Stearns 1-056-X00 is a cutting-edge product that has been designed to meet the demands of modern users in various fields, ranging from industrial applications to personal usage. This innovative device boasts a range of features, technologies, and characteristics that set it apart in its category and make it a reliable choice for consumers.

One of the main features of the Stearns 1-056-X00 is its robust build quality, which ensures durability and longevity. The device is constructed with high-grade materials that can withstand harsh environmental conditions, making it suitable for outdoor and demanding industrial settings. Its compact design makes it easy to handle and transport, providing users with convenience without sacrificing performance.

The Stearns 1-056-X00 is equipped with advanced technology that enhances its functionality. This includes an intuitive user interface that allows for seamless operation. Users can easily navigate through settings and configurations with minimal training, which is particularly valuable in high-paced work environments. Moreover, the integration of smart connectivity features allows for real-time monitoring and control through mobile devices, ensuring that users can manage their operations from anywhere at any time.

In terms of performance, the Stearns 1-056-X00 is powered by a high-efficiency engine that not only delivers exceptional output but also minimizes energy consumption. This feature aligns with the growing trend towards sustainability and eco-friendliness, catering to environmentally-conscious consumers and businesses. Furthermore, its customizable settings enable users to optimize performance based on their specific applications.

Safety is a paramount consideration in the design of the Stearns 1-056-X00. It is fitted with multiple safety mechanisms, including overload protection and automatic shut-off systems, ensuring that users can operate the device with peace of mind. This commitment to safety makes it suitable for a wide range of applications, including those where precision and reliability are crucial.

Another characteristic that elevates the Stearns 1-056-X00 is its versatility. With multiple attachments and accessories available, users can easily adapt the device for various tasks, enhancing its utility across different sectors.

Overall, the Stearns 1-056-X00 stands out as a highly efficient, durable, and user-friendly solution designed to meet contemporary needs while adhering to the highest safety standards, making it an excellent choice for both professional and personal use.

Manual Adjust Brakes