Seagate ST11950N/ND/W/WD General description, 12 ST11950 and ST12550 Installation Guide, Rev. D

Page 14

12 ST11950 and ST12550 Installation Guide, Rev. D

General description

Barracuda 1 and 2 SCSI disc drives are high-speed, random-access digital-data storage devices. The ST11950N/ND and ST12550N/ND drives are illustrated in Figure 1, and the ST11950W/WD and ST12550W/WD drives are illustrated in Figure 2. Specifications and DC power requirements for the drive are listed in tables following the figure.

The drive is a component for installation in an enclosure designed for the drive. This is often a rack within the system or an external enclosure designed to house one or more disc drives or other peripheral units. In either case, the disc drive must receive adequate cooling (refer to “Providing adequate cooling”) and it must be suffi- ciently grounded and shielded from emissions. The Barracuda 1 and 2 Product Manual (part number 83327780) contains guidelines for a properly designed enclosure.

Image 14
Contents Barracuda 1 Disc Drive ST11950N/ND/W/WD ST12550N/ND/W/WD Contents ST11950 and ST12550 Installation Guide, Rev. D Electrostatic discharge protectionImportant safety information and precautions Page ST11950 and ST12550 Installation Guide, Rev. D Wichtige Sicherheitshinweise Page Page Page Page SeaFONE 408 10 ST11950 and ST12550 Installation Guide, Rev. DSeaFAX USA 408 438-2620 England SeaTDD 408Location Number SeaBOARDTelephone 12 ST11950 and ST12550 Installation Guide, Rev. D General descriptionBarracuda 1 and 2 disc drive N/ND type 14 ST11950 and ST12550 Installation Guide, Rev. D Characteristics ST11950N/ND ST11950W/WDCharacteristics ST12550N/ND ST12550W/WD 16 ST11950 and ST12550 Installation Guide, Rev. D AmpsST11950 and ST12550 Installation Guide, Rev. D 18 ST11950 and ST12550 Installation Guide, Rev. D From previousInitial setup information 20 ST11950 and ST12550 Installation Guide, Rev. D Setting the Scsi ID jumpersSetting the Scsi ID on N- and ND-type drives 22 ST11950 and ST12550 Installation Guide, Rev. D Setting the Scsi ID on W- and WD-type drivesTerminating the drive Scsi bus terminationInstalling terminator packs ST11950N shown ST11950N and ST12550N drivesST11950W and ST12550W drives 26 ST11950 and ST12550 Installation Guide, Rev. D Enabling termination On ST11950W and ST12550W drivesTerminator power Termination is supplied28 ST11950 and ST12550 Installation Guide, Rev. D Changing other applicable jumper optionsScsi 30 ST11950 and ST12550 Installation Guide, Rev. D Scsi I/ORES PAR DMS RES MTR WP 32 ST11950 and ST12550 Installation Guide, Rev. D Synchronizing spindlesJ5 Pin 34 ST11950 and ST12550 Installation Guide, Rev. D ST11950N/ND ST12550N/ND DrivesProviding adequate cooling 36 ST11950 and ST12550 Installation Guide, Rev. D Kühlung des SystemsAbove unit Über der Einheit Under unit Unter der Einheit 38 ST11950 and ST12550 Installation Guide, Rev. D Mounting the drive and connecting cablesInstallation des Laufwerkes und Anschluß der Kabel 40 ST11950 and ST12550 Installation Guide, Rev. D Dimensions Abbildung 15. LaufwerkabmessungenPage DC power connector Abbildung 16. Gleichstromanschluß Hinweis Page Formatting the drive