6.3 Camera Setup
Camera Setup allows you to turn cameras on or off.
Press ▲, ▼, ◄ or ► button to select a channel and then press [SEL] to modify the setting ON or OFF.
Note: If a camera channel is set to off it will not record (Refer to 6.4 Record Setup)
6.4 Record Setup
Record Setup allows you to set up recording channels.
Press ▲, ▼, ◄ or ► button to select a channel, and then press [SEL] to modify the setting to ON or OFF.
If a channel is disabled in Camera Setup, it will not record and the DVR will display “NOCAM” on screen.
6.5 Record Frame rate
The total frame rate is 50fps (PAL) or 60fps (NTSC). If the sum of the frame rate you select for all cameras is greater than 50fps (PAL) / 60fps (NTSC), the DVR will automatically adjust the largest frame rate value to a smaller value.
Press ▲, ▼, ◄ or ► button to select a channel, and then press [SEL] to increase the value or press [■STOP] to reduce the value.
Note: Higher frame rate shows smooth images but requires more hard drive space.
9