Rotel RDV-1093 owner manual Sleep, Audio Fmt. Pref, Disc Resume, Status Bar Delay, Restore Default

Options include:

23

System Setup Menu

English

Sleep

•Auto (default): Plays the disc’s own default language

•English

•Français

•Español

•Deutsch

•Italiano

MENU

DVD playback

system setup

video setup

audio setup

speaker setup

parental control

high def. setup

exit menu

status bar

status bar delay

screen saver

sleep

restore default

menu language

dim front panel

The RDV-1093 will automatically turn off after a specified time set with this menu item. This prevents a DVD from returning to a static menu screen if it is left unattended. There are three settings:

•	OFF: Disables the Sleep feature. Unit stays
	on indefinitely (default)
•	120: Auto Standby turns off the unit after

Audio Fmt. Pref.

Select an audio format as the default audio soundtrack for DVDs when it is available on the disc. You can still override the preference and select a different audio format when playing a specific disc. When a disc does not have the selected audio format, the disc plays its default audio format.

Options include:

•Auto (default): Plays the disc’s own default audio format.

•PCM Stereo: Plays the stereo PCM digital soundtrack.

•Dolby 5.1: Plays the Dolby Digital 5.1 or Dolby Digital EX soundtrack.

•Dolby Stereo: Plays the Dolby Digital 2.0 stereo soundtrack.

•DTS: Plays the DTS 5.1 or DTS-ES soundtrack.

Disc Resume

This feature lets you resume playback of a disc at a specific point. To use this feature set the Disc Resume function to “on”. Then, while a disc is playing, put the unit into Standby mode or press the OPN/CLS button . Then when the RDV-1093 is turned on again, or the same disc is reloaded, disc play resumes at the point where play was interrupted.

If you do not want the RDV-1093 to resume playback of a disc after it is put into Standby mode or after the disc drawer has been opened, press the STOP . button twice.

This menu provides seven settings for general configuration of the system.

Status Bar

The DVD player displays a status bar on the TV screen whenever buttons on the remote are pressed. Status indicators show the play mode, rapid play speed, etc. or alert you to the availability of multi-view angles, multilingual subtitles, and multilingual sound tracks on a DVD. Generally, the status bar display is useful; however, you may wish to disable the display when recording a DVD.

•ON: Select to enable the Status Bar feature (default).

•OFF: Select to disable the Guide feature.

Status Bar Delay

This setting determines the length of time that the status bar is displayed after pressing a button on the remote. The default setting is 5 seconds, or you can select a different length of time, from 1 to 10 seconds.

Screen Saver

TV Monitors can be damaged if a static im- age is displayed for a long time. The Screen Saver feature automatically replaces a steady image with a moving image following several minutes of inactivity. The screen saver, when displayed, can be cancelled with the press of any button.

•ON: The automatic screen saver function is activated (default setting).

•OFF: Disables the screen saver function.

	120 minutes.
•	90: Auto Standby turns off the unit after
	90 minutes.
•	60: Auto Standby turns off the unit after
	60 minutes.

Restore Default

This item restores the factory default settings.

•OFF: Leaves the settings as they are cur- rently set (default).

•ON: Restores all settings to the factory default settings.

Menu Language

Select the language displayed in the On-Screen Menus and other on-screen status screens dis- played by the RDV-1093. Options include:

•English (default)

•Français

•Español

•Deutsch

•Italiano

NOTE: Some On-Screen messages are shown in English, regardless of the setting.

Dim Front Panel

The brightness of the front panel display can be reduced to avoid distraction while viewing in a darkened room.

The default setting “0” is the brightest setting. A setting of “6” is the dimmest setting. The “OFF” setting turns the front panel display off.

NOTE: Override this default setting by pressing the DIM button on the remote re- peatedly until the desired setting is reached.