RDV-1093 DVD Audio/Video Player
Menu Screens
A number of menu screens can appear during configuration of the
14
LED Indicators 
Two
Disc Drawer 
A
MENU
DVD playback
system setup
video setup
audio setup
speaker setup
parental control
high def. setup
exit menu
audio track | Dolby Digital 2.0 | |
camera angle | Dolby Digital 5.1 | |
|
| |
subtitle |
| |
DVD auto play | up/down to select | |
| ok to confirm | |
subtitle pref. | ||
|
| |
audio lang. pref. | left or return to go back | |
| with no change | |
audio fmt. pref. | ||
menu for help | ||
disc resume | ||
|
HDMI lights when HDMI or HDMI/DVI cables are connected to the
Front-Panel Display 
A lighted display on the |
OPEN/CLOSE Button 
Press to open or close the Disc Drawer.
Remote Sensor 
The remote sensor receives infrared signals from the remote control. Do not cover or block the sensor.
The menu screens provide access to various settings and features described in the Con- figuration section of this manual. The menu system appears when the SETUP button is pressed, typically whether the disc or stopped or playing.
Screen Saver
To prevent damage to a TV monitor during prolonged display of a static image, the unit automatically activates a moving ROTEL logo screen saver display after several minutes.
The screen saver display is turned off, returning to the previous display, when any front panel or remote button is pressed.
Front Panel Overview
The following is a brief overview of the con- trols and features on the front panel of the
POWER Button and LED 
The POWER button serves as a master on/off switch. In the out position, the unit is completely powered down and cannot be activated by the remote. Press the button in to activate the unit, indicated by the front panel display be- ing illuminated. With the front panel POWER button in the on position, the remote control ON/OFF buttons are used to activate the unit or put it in standby mode. In standby mode, the POWER LED remains lit, but the front panel display is turned off.
NOTE: Pressing the OPEN/CLOSE or PLAY / buttons also turns the unit on when it is in Standby mode.
status of the unit, activation of special features, |
and track/time information. See the illustration |
at the front of this manual for the location of |
each section of the display: |
Title/Group 
displays the number of the current Title or Group.
Chapter/Track 
displays the number of the current Chapter or Track.
Play/Pause 
shows a play or pause indication.
Status/Disc Type 
displays the current status of the unit (Open, Close, No Disc, etc.). When a disc is playing, this section of the display shows the sampling rate and format of the disc
Audio Format 
displays the audio for- mat of the inserted disc (Dolby Digital, DTS, PCM, etc.)
Remain 
shows the letter R when the remaining time of disc or selection is being displayed.
Time 
displays the elapsed time when a disc is playing
Function 
indicates which special features are activated, A in the first segment for angle, Z in the second segment for zoom, and an indicator for the type of repeat in the fourth segment.
Audio Channel 
shows which of the six possible audio channels are in use. 2/0 indicates a stereo signal, 3/2 indicates five channels with three front and two surround, 1CH to 6CH for
PLAY Button 
Press the PLAY / button to start playing the disc from the beginning or to resume play if playback is paused.
STOP Button 
Press the STOP . button to stop disc play- back.
PAUSE Button 
Press the PAUSE ,button to temporarily suspend play or to advance the still picture frame by frame when playback is paused.
TRACK Buttons 
The TRACK {}buttons skip forward or back to the beginning of the next selection.
SEARCH Buttons 
Press the SEARCH [ ] buttons to begin variable