Swann 4 CH Digital Video Recorder user manual Timer

8. MESSAGE LATCH

To select whether the DVR messages will disappear after 10 seconds or remain on screen. NO is the default setting which the messages will disappear after 10 sec.

NOTE : Video loss, Alarm and Motion messages will be shown the same as Alarm Duration time.

9. DATE DISPLAY

To set the date Y/M/D, M/D/Y, D/M/Y and OFF on monitor or not.

10. DATE

To set the date on the DVR.

11. TIME

To set the time on the DVR.

12. CLEAR HDD

(SYSTEM)

AUDIO INPUT		1
BUZZER		ON
EXT ALARM		ON
VLOSS ALARM		ON
MOTION ALARM		ON
KEY MUTE		YES
HDD OVERWRITE		YES
MESSAGE LATCH		YES
DATE DISPLAY		D/M/Y
DATE	26-DEC-2003 [FRI]
TIME		22:55:34
CLEAR HDD		YES
SYSTEM RESET		YES

Delete all the contents of the HDD. When you choose “YES” on this option, press “ENTER” and you will be prompted with the question shown: Press “→” to clear HDD or press ”←” to cancel.

13. SYSTEM RESET

Reset all system settings back to factory default settings. Select “YES” and press “ENTER” button.

TIMER

1. DAY

Select the day, or days of the week (Mon–Fri / Sat-Sun / Daily) that you wish to schedule the DVR to automatically record.

NOTE :

1.Date could be changed by “+” and “-” buttons.

2.If you have selected the date and Timer recording set from that specific day to a new day, then the Timer Recording Schedule will be set as whole week.

For specific date of Timer Recording Schedule, it is not recommended to set Ending Time over 23:59. For example: If you set Timer Schedule Day as Sunday, and START from 11:30, but End on 00:20, then Recording Timer Schedule is set as from every Sunday's 11:30 to next Sunday‘s 00:20. If you only want to set Recording Timer Schedule from every Sunday 11:30 to Monday 00:20, then you should set Recording Timer Schedule as Sunday from 11:30 to 23:59, and Monday from 00:00 to 00:20.

2. START

Set the time to start the recording.

(MENU)

TIMER CAMERA RECORD ALARM DWELL PIP MOTION DISPLAY REMOTE USER SYSTEM EVENT

11