Swann 4 CH Digital Video Recorder user manual Camera Select, LED Light

Page 7

12. PAUSE / Up

Pause : Under DVR playing mode, it can pause the action.

UP : Under setup mode, it works as Up button.

13. REW / Left

REW : Play video fast backward. (Press REW button again to adjust speed as 1, 2, 4, 8, 16, 32 times)

Left : Under setup mode, it works as Left button.

14. PLAY

Press PLAY button to playback recorded video.

15. REC

Press “REC” to start recording.

16. CAMERA SELECT (1-4)

Press the Camera Select (1-4) to select the camera.

17. LED LIGHT

The LED Light is ON under following condition.

HDD : HDD is reading or recording.

HDD Full : HDD is full

ALARM : To turn off the ALARM LED light, please refer to page.13 and set the ALARM mode as OFF.

TIMER : When Timer is Enabled

PLAY : Playing mode

REC : Recording mode

6

Image 7
Contents CH Digital Video Recorder Page Advanced Operation Table of Contents Package Content FeaturesBefore Operation Installation GuideFront Panel LED Light Camera SelectMain Rear PanelExternal I/O CallOperation Getting StartedRecording Camera Select Play BackMenu Options Main MenuSystem Timer Camera Record AlarmPIP DwellMotion Motion Record AreaRemote DisplayUser PasswordUser EventSearch Operation OptionsZoom Video LossKEY Lock TroubleshootingRS-232 Remote Protocol Recording Rate SpecificationsHard disk to the pin connect to ensure correct installation Appendix #1 Install the HDDStep Open the cap Pull out the cartridge Appendix #2 Replace the HDDDVR Appendix #3 PIN ConfigurationsPIN 15. External Alarm COM PIN 7. External Alarm NCPIN 8. External Alarm no PIN 14. Alarm Reset InputNtsc System PAL System Appendix #4 Recording SpeedVideo Web Server Appendix #5 Network Application