Swann DVR4-1000 manual Package Contents, Troubleshooting Guide

Page 4

Package Contents

DVR4-1000™ Unit

Remote Control

Operating Instructions

Easy Setup Guide

Power Adapter with Cable

Software CD

BNC to RCA Video Cable

Operating Instructions

Security Stickers

If you are missing any of the components above, contact Swann Communications for assistance.

Troubleshooting Guide

Problem: The Power light keeps blinking red.

Solution: Ensure you are using the correct Power Adapter provided for the DVR. If you have purchased the DVR as part of a kit, make sure the cameras are oper- ating on a separate Power Adapter. The larger power adapter with higher amps is designed specifically for the DVR.

Problem: The hard drive is not working.

Solution: Ensure the DVR is using the correct Power Adapter supplied. Open the DVR and ensure the SATA cable is connected to the DVR and Hard Drive.

Problem: The hard drive usage is at 100% and will not record.

Solution: Format the hard drive or set the hard drive to overwrite mode.

Problem: I can only see a blue screen where my camera should be.

Solution: If only 1 camera view is blue, the DVR is not receiving that camera’s signal. Check that the camera connections on the back of the DVR are secure. Ensure the camera is plugged in and has power.

Problem: The DVR will not turn on.

Solution: Make sure you are using the correct Power Adapter for the DVR. Try a second power outlet. Check the connections on the back of the DVR.

Problem: My DVR does not save footage more than a few days old.

Solution: Change the quality settings to Normal, lower the camera frame rates or enable motion recording to conserve hard drive space.

Problem: I want to format my Hard Drive but I don’t remember the password.

Solution: The default password is “111111”. Swann recommends changing the default password to prevent tampering or unauthorized use.

Problem: I am using wireless cameras and the DVR keeps beeping and motion records all the time.

Solution: Analog wireless cameras suffer from interference. The DVR interprets the change of image as motion and records. Swann recommends the use of wired cameras or digital wireless cameras such as the ADW-300 for DVR recording.

4

21

Image 4
Contents NEW Zealand toll free Australia toll freeWarranty Information Limited Warranty Terms & ConditionsBefore You Begin FCC VerificationTechnical Specifications ContentsPackage Contents Troubleshooting GuideViewing Backup Footage on a PC DVR LayoutRemote Control Layout Using the VVFPlayer softwareUsing the Remote Control for the First Time VVFPlayer InterfaceBackup Footage Connecting Cameras and Power AdapterConnecting the DVR to a TV Monitor Time Search Powering the DVR On/OffAuto-Recovery Feature Exit MenuSystem Menu Image DisplaySingle Camera View Multi Camera ViewInstalling or Changing a Hard Drive Installing / Changing a Hard Drive in the DVR4-1000Screen Menu Audio MenuMotion Detection Menu Starting the DVR With a New Hard DriveAccessing and Navigating the Menu System Menu OperationCamera Menu Record Menu
Related manuals
Manual 2 pages 43.89 Kb