Backup Footage

The DVR4-1000™ has a backup feature via the USB port on the front of the DVR. The DVR accepts ﬂash drives or thumbdrives up to 2GB in size. Follow the steps below to backup footage:

Connecting Cameras and Power Adapter

1.Insert a USB ﬂash drive / thumbdrive (not included) to the USB port.

2.Press Play to enter playback mode or use the Time Search feature to ﬁnd a recording.

3.Pause playback at the start of the footage you would like to backup.

4.Press the Menu / File button to display the USB Backup Mode.

5.Press the CH1 button to

designate the start of a backup recording.

6. Play and ﬁnd the end of the

footage you want to backup

and press Pause.

Cameras and

accessories optional

7. Press the CH2		button to

indicate the end of a backup
recording.
8. When you are happy with
the Start and End time of
the recording press the CH4

button to continue.

9.The Backup to USB screen will appear with details of the USB device inserted, size requirements and ﬁle name. Press CH4 to begin copying.

10.When the backup is complete press the Stop button and remove the USB device.

WARNING: Do not connect the DVR directly to a computer. Do not remove the USB Flash Drive while the DVR is copying footage. Damage may occur to attached devices if used improperly.

1.Connect the Power and BNC ends of the Security Camera to an Extension Cable.

2.Connect the BNC end of the Extension Cable to the back of the DVR.

3.Connect the power end of the Extension Cable to the Power Splitters.

4.Connect the Power Splitter to the Camera Power Adapter.

5.Plug in the Camera Power Adapter and the DVR Power Adapter to mains power outlets.