MicroBoards Technology QD-DVD 127, QD-DVD 123 Introduction, Unpacking your system, Installation

Introduction

The QD-DVD MultiDrive Series includes the QD-DVD 123, QD-DVD 125, and QD-DVD 127. Each is a high speed, low cost DVD Recordable duplication system from Microboards Technology, LLC.

The QD-DVD MultiDrive is perfect for any user requiring easy copying of audio, video, or Data CDs. Superior technology allows the QD-DVD MultiDrive to ship without a hard drive. LED indicators provide the user with status of the duplication process, minimizing the number of faulty discs.

Applications suited for the QD-DVD MultiDrive include Pro Audio, Multimedia, Government / Education, Software Development, Medical Imaging, and Data Interchange.

Unpacking your system

When unpacking your duplicator, confirm the following items are included:

•QD-DVD MultiDrive duplicator

•Power cable

•Manual

•DVD-R disc

•USB cable

•Zulu2 CD/DVD recording software Installation Disc

If any of these items are missing, please contact Microboards Technology Technical Support.

IMPORTANT: Please keep all the packing for your QD-DVD MultiDrive duplicator. If your unit ever needs to be sent in for service, it must be returned in the original packing or the warranty will be voided.

Installation

•Connect the power cable to the QD-DVD MultiDrive duplicator and plug in to a protected power outlet strip or UPS power supply.

Note for Installation:

1)The socket outlet shall be installed near the equipment and be easily accessible.

2)Do not block cooling fans.

•Turn on power to the duplicator.

•The system will go through initialization and then display: 1. Copy.

•The system is now ready to use.

•For USB Mode, connect to a PC via an unoccupied USB port. This mode must be enabled in the Advanced Setup Menu (See pages 17-18).

Basic Instructions

Buttons and LCD

There are four buttons and an LCD on the front panel of the QD-DVD MultiDrive duplicator.

LED display: Shows the menu items and any status messages that may come up during operation

ENT button: The ENT button, used to start a duplication process or enter into an area in the menu structure.

ESC button: The ESC button, used to stop an operation or move up the menu structure.

▲button, used to scroll up in the different menus.

▼ button, used to scroll down in the different menus.

5