MicroBoards Technology QD-DVD 127, QD-DVD 123, QD-DVD 125 user manual Functions, Copy, Test

Functions

There are 9 different functions for the QD-DVD MultiDrive duplicator: Copy, Test, Test & Copy, Verify, Compare, Prescan, Disc Info, Edit Track and Setup. For the Setup options, please refer to pages 14-16.

These instructions refer to using 7 DVD recorder drives (available only in the QD-DVD 127), but the QD-DVD MultiDrive will operate using any number of the available recorder drives.

Copy

The Copy function is used to copy your master disc to the blank media. The QD-DVD MultiDrive duplicator will be in Copy mode when it is turned on. The display will read:

1. Copy

Place your master disc into the DVD reader drive (top).

Place your blank media into the DVD recorder drives.

Press the ENT button on the controller interface.

The data will now be copied to the blank discs.

Copying – 16x	48%
2.3GB	03:15

When the job is completed, the recorded discs will be ejected from the recorder drives. The display will read:

1.0Copy

OK: 07

NOTE: CD masters must be copied to CD media, and DVD masters must be copied to DVD media.

Test

The Test function is used to simulate copying your master disc to the blank media. To use the Test function, press the ▼ button on the controller until Test is displayed:

2. Test

In Test mode, the blank media will remain blank and can be used again.

Place your master disc into the DVD reader drive (top).

Place your blank media into the DVD recorder drives.

Press the ENT button on the controller interface.

The duplicator will now simulate writing to the blank discs.

Testing – 16x	48%
2.3GB	03:15

When the job is completed, the recordable discs will be ejected from the recorder drives. The display will read:

2.0Test OK: 07

8