Troubleshooting
Symptom | Possible Problem | Solution |
Sound is distorted | Volume level is set too high | Decrease the volume |
| Sound source is distorted | If the iPhone/iPod original sound source (MP3) is old or of poor quality, |
|
| distortion and noise are easily noticed with |
|
| different audio source such as a music CD. |
|
| If you are using an external sound source like older generation of iPod |
|
| or iPod Shuffle, try reducing the output volume on the device itself. Also |
|
| try turning bass boost OFF. |
| EQ settings are too high. For example, if the | Lower EQ settings. |
| treble is too high, the 3D effect may not sound |
|
| as good |
|
Unit/adaptor gets | This is normal | Turn unit off for awhile or lower volume |
warm after extended |
|
|
play at high volume |
|
|
Snooze time | Custom snooze time not set | Press and hold Snooze button then press + or - button to adjust |
is too long/short |
|
|
|
|
|
Alarm not working | AM/PM time/alarm time not set correctly | When setting clock or alarm time, take note of the AM/PM indicators |
| Alarm time or source selected for alarm 2 , not | Make sure to set the alarm time and source for the alarm icon 1 or 2 |
| alarm 1 or vice versa | that is shown on the clock display |
| 7 days is every day alarm, 5 days is | |
|
| page 5 for setting alarms. |
| Calendar is not set correctly, which can affect | See page 4 for setting Clock/Calendar Section. |
| 7/5/2 day alarm operation |
|
11