JVC DR-MV7SU, RCJ106M_NA1UJJ_ENG manual Match, Temporarily?

Symptom		Cause	Correction
The Recorder does	not	No disc is inserted.	Insert a disc or tape. (Check that the
start playback.		No tape is inserted.	disc or tape indicator in the display
			window is lit.)
		An unplayable disc is inserted.	Insert a playable disc. (Check the disc
			type and Regional code.)
		The disc is placed upside down.	Place the disc with the playback side
			down.
		The disc is not placed within the	Place the disc on the disc tray correctly
		guide.	inside the guide.
		The disc is dirty.	Clean the disc.
		The Rating level is set.	Cancel the Rating function or change
			the rating level.
Video tape cannot	be	Is the cassette compartment empty?	Eject the tape in.
inserted.
The Remote Control		There is an obstacle in the path of the	Remove the obstacle.
does not work properly.		Remote Control and this unit.
		The batteries in the Remote Control	Replace the batteries with new ones.
		are exhausted.
		The Remote Control is not pointed at	Point the Remote Control at the remote
		the remote sensor of the Recorder.	sensor of the Recorder.
		The Remote Control is too far from	Operate the Remote Control within
		the Recorder.	23ft (7m).
		This Remote Control use the same	When using a VCR, first press the VCR
		buttons for VCR and DVD functions	button. When using a DVD, first press
		(ex.PLAY).	the DVD button.
		The remote control’s code does not	If the power has been unplugged or the
		match.	power supply has been stopped, the unit
			code is changed to C code automatically.
			Reset the remote control code of the unit.
Camcorder image is		Camcorder is off.	Turn camcorder on and operate
not shown.			properly.
Camcorder image via		The recorder’s source is incorrect.	Use AV INPUT to select input channel
A/V input or DV IN to			(AV1, AV2 or DV IN).
Recorder is not shown
on TV screen.
Timer recording is not		Clock in record is not set to correct	Set clock to correct time.
possible.		time.
		Timer has been programmed	Reprogram Timer.
		incorrectly.
		Has the power supply been stopped	If the power has been unplugged or the
		temporarily?	power supply has been stopped, the Timer
			Recording setting is cancelled. Reset the
			clock setting and Timer Recording setting.
			(If you set the clock setting to Auto, the
			clock is set automatically.)
		(TIMER Record) indicator light does	Reprogram Timer and turn off the
		not appear after programming timer.	Recorder enable timer.
		The TV program has copyonce signal.	Use DVD-RW discs formatted in VR
			mode.

52