Playback
Playing a Tape
1.Press VCR to control the VCR deck.
2.Insert a
•If the unit is powered off, it will power on automatically when the tape is loaded.
•If the Timer indicator lights on the front panel display window, press STANDBY/ON once.
3.Press PLAY (N) to start playback.
•If a tape without a safety tab is inserted the unit starts playback automatically.
4.Press STOP (x) to stop playback.
•If the tape reaches the end before you press STOP (x) the Recorder automatically stops, rewinds and ejects the tape.
Notes:
•
-This Recorder can play back
-SQPB is an abbreviation for
•If you insert an unformatted disc during the VCR playback, the unit will stop the VCR playback and change to DVD mode automatically, then the disc initialize menu will appears.
Playing a DVD or Video CD
1.Press DVD to control the DVD deck.
2.Press OPEN/CLOSE (Z) to open the disc tray. Load your chosen disc in the tray, with the playback side down.
3.Press OPEN/CLOSE (Z) to close the tray. Playback starts automatically. If playback does not start, press PLAY (N) or Starts playback using HOME menu.
4.To stop the playback, press STOP (x).
The unit records the stopped point, depending on the disc. “Xx” appears on the screen briefly. Press PLAY (N) to resume playback (from the scene point). If you press STOP (x) again or unload the disc (“x” appears on the screen.), the unit will clear the stopped point.
5.Press OPEN/CLOSE (Z) to remove the disc. Press OPEN/CLOSE (Z) to close disc tray or press STANDBY/ON (1/`), the disc tray closes automatically and unit turns off.
Note:
•After loading a disc, the black screen may appears for a moment. It is not a malfunction.
26