Magnavox ZV427MG9 owner manual Timer Recording, Use K / L to enter the date, then, Press B

TIMER RECORDING

You can program the unit to record up to 12 programs within a month in advance. Daily or weekly program recordings are also available.

Before recording, make sure

•Set the clock before setting a timer programming.

•Insert a recordable disc with enough recordable space.

Guide to Timer Programming Display

3	1		2
Timer Programming
JAN/ 6/12 12:00 AM L1 SP
SP (1:00)		THU JAN/05 11:00AM
Date	Start	End	L1/L2	6
JAN/06	12:00AM	1:00AM	L1
	New Program
			1/1
4			5

Title of a timer program (Contains date, time, selected external input position, recording mode of the program)

2Current date and time

3Recording mode, and length of the recording

4Timer program list

5Total number of pages and current page (2 pages maximum)

6Recording media (“” (DVD) or “” (VCR))

	1 Press [TIMER].
	2	Use [K / L] to select “New Program”,
		then press [OK].
		Timer Programming
				THU JAN/05 11:00AM
		Date	Start	End	L1/L2
			New Program
Note		• If there are 6 or more programs, use
• If you have not set the clock yet:
		[H / G] to change pages.
Entry screen for the clock setting will appear instead	3
of the timer programming list at step 1. Continue		Use [K / L] to enter the date, then
with the step 3 in “SETTING THE CLOCK” on page 26
before setting a timer programming.		press [B].
• Use [s / B] to move the cursor to the left and the
right in the entry screen for the timer programming.		JAN/06	- - : - -		- - : - -
		Date	Start		End
• If a basic recording or one-touch timer recording is in		L1/L2	REC To		Mode
progress on one component (e.g., VCR) and the timer
		L1	DVD		SP
recording set for the other component (e.g., DVD) is				SP	2h00m
about to begin, the unit automatically switches to the		JAN/01
programmed channel for timer recording 2 minutes					When pressing [L] at
before the programmed starting time, and the
		Daily			the current date, the
recording in progress (for VCR) will be canceled
UNLESS their recording channels are the same. If their		MON-SAT			date will change as
recording channels are the same, the timer recording					follows.
will start without canceling the recording currently in		MON-FRI
progress. In this case, the recording of the same		SAT			e.g.) January 1st
channel will be made on both DVD and VCR.

• You cannot make a program whose recording time						FRI
exceeds 12 hours.
• Cancel the timer-standby mode by pressing					SUN
	[TIMER SET]		before operation for either DVD or VCR.
	When finished		operating, press	[TIMER SET]	to	JAN/31
		resume the timer-standby mode.

•In the timer-standby mode, you can turn on the power and use the component (VCR or DVD) which is not currently timer-programmed.

EN 31

Introduction Connections Basic Setup Recording Playback Editing Function Setup VCR Functions Others

Español