Magnavox DV220MW9 To Cancel the Satellite Link on Standby, Dubbing a Cassette Tape

RECORDING

Satellite Link

You can set the unit to start recording whenever it detects a video signal from the external tuner.

Preparing for the Satellite Link:

•Only L1 (rear) is available for satellite link and be sure that this L1 needs to be connected by the external tuner.

•The external tuner should be equipped with some kind of timer function. Using timer function of the tuner, set it to the output audio/video signals when it comes to the time you want to start recording, and stop those signals when it comes to the time you want to finish recording.

Refer to the tuner’s manual on how to set the timer.

L1

VCR

						AUDIO IN	To video out jack	external tuner
DIGITAL		AUDIO	S-VIDEO COMPONENT
				AUDIO OUT
		DVD	Y	L	VCR
				DVD/VCR
AUDIO OUT		OUT	OUT VIDEO OUT
		L	CB	R	AUDIO IN	VIDEO IN
		R			VIDEO IN
	COAXIAL			VIDEO OUT

CR

To audio(L)out jack

RCA audio/video cables

VCR

VHSVHS Press first.

1 Press SPEED to select the desired tape speed.

					SP
		SETUP
2 In the stop mode, press
3 Use	/	to select			TIMER PROGRAMMING
						- M E N U -
“SATELLITE LINK”. Then, press				B SATELLITE LINK
					AUTO REPEAT		[OFF]
	to go to the next step.				CLOCK SET
					LANGUAGE SELECT
4 Use	/	to select the				SATELLITE LINK
			to
desired hour. Then, press				0 1 : 0 0			PM

go to the next step.

Then, repeat procedures above to select the minute

as well.

The hour can be selected from 1-12 with AM or PM. When the external tuner signal is stopped, recording will be stopped.

5 Press to set satelliteSATELLITE LINK link standby mode.

0 1 : 3 0 PM

[ON]

[TIMER REC] indicator: lights up and the unit goes to the DVD mode. If you do not use DVD function, turn OFF the unit.

An external tuner must be turned ON for satellite link to start. If external tuner is not set to output signals, satellite link will remain in standby mode.

To Cancel the Satellite Link on Standby:

Press [TIMER SET] on the remote control or [STOP/EJECT C A] on this unit.

To Cancel the Satellite Link in Progress:

Press [STOP/EJECT C A] on this unit.

22

Note: • Recording picture will be distorted if the copy

protection signal is being detected during satellite link.

•When the timer recording and the satellite link are overlapped, those recordings are recorded as illustrated below.

e.g.) In case of the satellite link is overlapped on the exist- ing timer recording.

timer recording satellite link

recording result

e.g.) In case of the timer recording is programmed in the middle of the satellite link.

timer recording satellite link

recording result

e.g.) In case of the timer recording is overlapped on the existing satellite link.

timer recording

satellite link

recording result

Dubbing a Cassette Tape

Warning: Unauthorized recordings of copyrighted cassette tapes may be an infringement of copyright laws.

front of the unit

output jacks of	VIDEO OUT		VIDEO	AUDIO
external device		RCA video cable
or	AUDIO OUT
	L		L2
		RCA audio cable

R

You can use a video disc player, cable/satellite box or other devices with the audio/video output jacks.

VCR

VHSVHS Press first.

1)Press [SPEED] on the remote control to select recording speed (SP or SLP).

2)Press [INPUT] on the remote control to select L1 or L2 whichever the jack the external device is connected to.

3)Press [RECORD] on the unit, and then start playback of the external device.

4)To stop recording, press [STOP/EJECT C A] on this unit.

5)Stop playback of the external device.

Note: • For best results during dubbing, use buttons on

this unit whenever possible. The remote control might affect another device’s operation.

EN