Magnavox DV220MW9 owner manual Informationi I N, Maintenance

Page 27
NTSC color
Specifications
Output signal format :
Disc Handling
you have referred to the relevant sections and to the “Troubleshooting Guide” in this manual, the laser optical pickup unit may be dirty. Consult your dealer or an authorized service center for inspection and cleaning of the laser optical pickup unit.
Cleaning Discs
• When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to out. Do not wipe in a circular motion.
• Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic spray intended for analog records.
Cleaning the Disc Lens

INFORMATIONI I N

Maintenance

PRECAUTIONS

Servicing

Please refer to relevant topics on the “Troubleshooting Guide” on page 26 before returning the product.

If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the power plug, and please call our toll free customer support line found on the cover of this manual to locate an authorized service center.

Cleaning the Cabinet

Wipe the front panel and other exterior surfaces of the unit with a soft cloth.

Never use a solvent, thinner, benzene or alcohol to clean the unit. Do not spray insecticide liquid near the unit. Such chemicals may discolor the surface or damage the unit.

Auto Head Cleaning

Automatically cleans video heads as you insert or remove a cassette tape, so you can see a clear picture.

If the playback picture is blurred or interrupted while the TV broadcast is showing clear, the dirt may have accumulated on the video heads, or the usage of rental or worn cassette tapes can cause this problem. If a streaky or snowy picture appears during playback, the video heads in your unit may need to be cleaned.

1.Please visit your local audio/video store and purchase a good quality VHS video head cleaner.

2.If a Video head cleaner does not solve the problem, please call our toll free customer support line found on the cover of this manual to locate an authorized service center.

Note: • Remember to read the instructions along with

the video head cleaner before use.

• Clean video heads only when problems occur.

PREPARATION BASIC OPERATIONS

IR Signal Check

• If the remote control does not work properly, you can test if the remote control is sending out the infrared signal with a digital camera (including built-in camera of cellular phone). It will help to define the cause of

ADVANCED

• If this unit continues to perform improperly even after

malfunction.

With a digital camera (including built-in camera of cellular phone): Direct a digital camera to remote control, press and hold a button on remote control. If infrared light appears through digital camera, the remote control is working.

PLAYBACK RECORDING

When you handle a disc, hold it by its edge and try not to touch the surface of the disc.

Always store the disc in its protective case when not in use.

Do not glue paper or put stickers onto the disc. This may damage the disc, and the unit may not read it correctly.

Recommended circumstances of recording MP3 files :

Video heads :

Rotary four-head

Sampling frequency :

44.1 kHz or 48 kHz

Tape width :

1/2 inch (12.65 mm)

Constant bit rate :

32 kbps ~ 320 kbps

Tape speeds :

SP :

1-5/16 inch/sec. (33.40 mm/sec)

Remote control :

Digital encoded infrared light system

 

LP :

16.67 mm/sec.

 

Operating temperature : 41°F (5 °C) to 104°F (40°C)

 

SLP : 7/16 inch/sec. (11.12 mm/sec.)

 

Power requirements :

120 V AC +/- 10 %, 60 Hz +/- 0.5 %

Disc media size :

5 inches (12 cm) / 3 inches (8 cm)

Power consumption (maximum) :

 

Terminals :

 

 

 

(standby : 2.8 W)

 

 

 

 

16 W

 

Component video output :

RCA jack x 3

 

 

 

 

Dimensions :

W :

17 3/16” (435 mm)

 

Y :

1 Vp-p (75 Ω)

 

 

H :

3 3/4”

(94 mm)

 

Pb :

700 mVp-p (75 Ω)

 

 

 

D :

9 3/16”

(233 mm)

 

Pr :

700 mVp-p (75 Ω)

 

S-video output :

Weight :

Approx. 5.63 lbs (2.55 kg)

Mini DIN 4-pin jack x 1

 

Y :

1 Vp-p (75 Ω)

 

 

 

 

Video output :

C :

286 mVp-p (75 Ω)

 

 

 

 

RCA jack x 1

1 Vp-p (75 Ω)

• Designs and specifications are subject to change without notice.

Coaxial digital audio output : RCA jack x 1

500 mVp-p (75 Ω)

• If there is a discrepancy between languages, the default language will

Audio output :

RCA jack x 4

2 V rms

be English.

 

 

 

Video input :

RCA jack x 2

1 Vp-p (75 Ω)

 

 

 

 

 

 

 

Audio input :

RCA jack x 2

2 V rms

 

 

 

 

EN

OPTIONAL SETTINGS TROUBLESHOOTING INFORMATION

27

Image 27
Contents DV220MW9 RADIO-TV Interference Precautionsp I NSSafety Instructions FCC WarningTrademarks of Dolby Laboratories PrecautionsLaser Safety Important Copyright InformationPreparationp I N ContentsSupplied Accessories Changing the DVD Settings in the setup menu · · ·About Cassette Tapes and Discs PreparationFunction Overview Remote ControlTitle DVD p.16 Setup p.23Mode DVD p.18 DVD DVD p.14 Press to activate DVD modeFront Panel 1516Source Rear Panel Installing the Batteries for the Remote ControlVCR and Basic DVD Connection ConnectionsConnection to a TV If Your TV Has Antenna in Jack OnlyBetter Picture Available on DVD OnlyBasic Audio Connection Good PictureConnection to an Audio System Playing Analog AudioPlaying Digital Audio Initial Setups Need EnglishENGLISH. Finally, press Clear For advanced playback, refer to the following pages BasicoperationsBasic Tions For VCR Playback For Disc PlaybackBasic Operations Advancedadva Playbackyback Advanced Playback Programmed Playback SettingsBlack Level Setting Using the Number buttons cannot exceedTo Change the Subtitle Language To cancel the subtitle, use B or s to set subtitle to OFFOn-Screen Display Subtitle Language and Audio LanguageRefer to pages Recordingr I GTape speed Type of tapeWhenanOTRoraTimerRecordingisCompleted Timer RecordingTo Check, Correct or Cancel a Timer Program To Cancel a Timer Recording in ProgressDubbing a Cassette Tape To Cancel the Satellite Link on StandbyTo Cancel the Satellite Link in Progress Satellite LinkChanging the DVD Settings in the setup menu Optionalopti Settingsttings Control Levels Optional Settings Parental Setting To Set the Parental LevelPress 1 , 2 or 3 to select the desired language Reset the settings to factory defaultTo call up the setup menu Use To select To select YES, then pressTroubleshooting Guide Troubleshootingtro TingInformationi I N MaintenanceLimited Warranty
Related manuals
Manual 28 pages 41.45 Kb