Magnavox MSD804 VCR Functions Playback, Recording & OTR One Touch Recording, Other Operations

Before:

Turn on the TV and set it to channel 3.

•If channel 3 is already occupied for broad- casting, see “RF Output Channel” section.

3

1

POWER

POWER ON

VIDEOAUDIO

REW F.FWD STOP/EJECT PLAY REC/OTR

3 2

4

2

OPEN

CLOSE

VC

CHANNELOU

Hint

•When a tape with- out record tab is inserted, the DVD/VCR will start playback automati- cally.

•Tracking will be automatically adjusted upon play- back. To adjust the tracking manually, press the CHAN- NEL buttons.

Before:

Turn on the TV and set it to channel 3.

• If channel 3 is already occupied for broadcasting, see “RF Output Channel” section.

SEARCH MODE

+10 0

2

OPEN

CLOSE

CHANNEL

Hint

•To view one chan- nel while recording another

1)While you are recording on the DVD/VCR, press the VCR/TV button.

2)At the cable box or satellite box, select the channel you want to view.

•If you have connect- ed the DVD/VCR to a cable box or satel- lite box, refer to “Hint for Cable Box or Satellite Box” section on page 6.

VCR Functions

REC

You can select a fixed recording time by press- ing the REC/OTR button repeatedly.

Accidental erasure prevention

To prevent accidental recording on a record- ed cassette, remove its record tab. To record on it later, cover the hole with cellophane

You CAN NOT copy a DVD to a videotape.

To stop recording temporarily (Pause mode)

Press the PAUSE/STILL button.

•During the rec-pause mode, five C marks appear on the TV screen. Each C mark represents one minute.

•Press it again to resume recording.

To cue or review picture during playback (Picture Search)

Press the F.FWD or REW button.

•Press it again and the DVD/VCR will search in super high speed. (in the LP/SLP modes only)

To freeze the picture on TV screen during play- back (Still mode)

Press the PAUSE/STILL button. Each time you press the button, the picture will be forwarded by one frame.

•If the picture begins to vibrate vertically during the still mode, stabilize the picture by pressing the CHANNEL buttons.

•If the picture is distorted or rolling vertically, adjust the vertical hold control on your TV, if equipped.

Counter Reset

Press the CLEAR/C.RESET button.

To play back in slow motion

Press the SLOW button during playback or the still mode.

•If the noise bars appear on the TV screen, you can reduce it by pressing the CHANNEL buttons.

Auto Rewind

When a tape reaches its end during playback, fast-for- ward, or recording (except timer recording and One Touch Recording), the tape will automatically rewind to the beginning. After rewinding finishes, the DVD/VCR will eject the tape.

Hint

•Still/Slow/Pause mode will be automatically cancelled after 5 minutes to pre- vent damage to the tape and the video head.

•To return to playback from the Picture Search/Still/ Slow mode, press the PLAY button.