D) VIDEO SETUP
The VIDEO SETUP options are illustrated below:
zCOMPONENT
CVBS : Choose this setting when your DVD player is connected to your TV via the normal RCA or
YUV : Choose this setting when your DVD player is connected to your TV via the COMPONENT output - YUV.
RGB : Choose this setting when your DVD player is connected to your TV via the COMPONENT output - RGB.
VGA : Choose this setting when your DVD player is connected to the computer monitor via the VGA output. Warning : If you are not sure about the connect, please always select the CVBS. Otherwise, the output screen to the TV/Monitor will be blank.
If you have wrongly selected the video output type and you got the blank screen on your TV/Monitor, please press the RESET button on the remote control to restore the
zTV MODE
Interlace : Choose this setting when your DVD player is connected to your TV via the COMPONENT output – YUV or RGB and your TV type should be normal interlace type.
Warning : If you are not sure about the connect, please always select the INTERLACE. Otherwise, the picture output to the TV/Monitor will be distorted.
If you have wrongly selected and you got the distorted picture on your TV/Monitor, please press the P/I button on the remote control to restore the
Note :
This setting is only selectable as long as you have selected YUV or RGB from the Component setup
Page 19