INTRODUCTION TO BASIC OPERATION
1.TURN ON THE TV AND YOUR DVD PLAYER
•Press the POWER button on the player to turn on the power to the player. The display on the player lights up and the player will start searching for a disc
NOTE: You cannot turn the power on using the remote if the power is off. You can only turn the player on and off using the remote when the player is in Standby mode. In Standby mode the display of the player turns off and it goes into power saving mode. Access the Standby mode by pressing POWER button on the player and then Only using the STANDBY/ON button on the remote.
•If there is no disc in the player, “NO DISC” will appear on the screen
2.INSERTING A DISC
•Press the OPEN/CLOSE button on the DVD player or the remote , and “OPEN” appears on the TV screen.
•Place a disc on the disc tray, label facing up and press OPEN/CLOSE button. “CLOSE” appears on the TV screen and the disc tray closes. Now the player will proceed to read the disc automatically.
3.PLAYING A DISC
•The contents of each disc menu (Root menu) varies according to who and how the disc was created and what features were included. The disc menu will automatically appear once the player has read the disc and all the warning screens have passed.
A) DISC MENU
a.Press MENU button once.
•The TV displays the DVD Root menu when a DVD disc is loaded. When a SVCD or VCD2.0 disc is loaded, the VCD menu will be displayed on screen (when PBC is off). Press the PBC button once to display current PBC state.
•PBC is only initialized when a SVCD of VCD2.0 disc is loaded.
Page 6