English
Special Recording
Copying from DVD To VCR
This unit allows you to copy the contents of a DVD to a VHS tape with a press of the DIRECT DUBBING button.
Note
●If the DVD you are attempting to copy is copy protected, you may not be able to copy the disc.
Insert Disc
1 Insert the disc you wish to copy in the DVD deck and close the disc tray.
Insert VHS Tape
2 Insert a blank VHS videotape into the VCR deck.
Copy the DVD to VHS Tape
3 Press the DIRECT DUBBING button on the unit front panel.
●The DVD will go into Play mode and the VCR will go into Record mode.
●If the DVD disc menu appears, you may need to press
the Play button manually to begin copying.
Stop the Copy Process.
4 When the DVD is finished playing, press the STOP button twice within 5 seconds to end the copy.
●You must stop the Copy process manually when the DVD movie ends, or the unit may replay and record over and over again.
Recording from another video recorder
With this video recorder you can make recordings from an external source, such as copying from another video recorder or a camcorder.
Note
In the following description, this video recorder will be one used for recording and will be referred to as VCR B. The other appliance will be used for playback and will be referred to as VCR A.
VCR A should be connected to the SCART socket on
1 the rear panel of your unit or the AV sockets on the front panel of your unit.
Insert the recorded tape into VCR A and a blank tape
2 into VCR B.
To start recording, press the RECORD on VCR B and
3 PLAY N on VCR A.
When you want to finish copying,
4 press the STOP x on both video recorders. Press STOP twice within 5 seconds.
34