JVC DR-MV5SE manual Clock Set, Just Clock

88 EN SUBSIDIARY SETTINGS

Clock Set	1 Press w e to select “INITIAL SET UP”, then press t.
	2 Press w e to select “CLOCK	DVD SET UP FUNCTION SET UP		INITIAL SET UP
	SET”, then press t.	AUTO CH SET	MANUAL CH SET	GUIDE PR	CLOCK SET

IMPORTANT:

If you performed Auto Set Up ( pg. 17) or Preset Download ( pg. 18), without ever having set the clock previously, the unit’s built-in clock is also set automatically.

Perform the following steps only if —

— Auto Clock Set has not been performed correctly by Auto Set

Up or Preset Download.

NOTE:

When you have selected

MAGYARORSZÁG, CESKÁ REPUBLIKA, POLSKA or OTHER EASTERN EUROPE for the country setting ( pg. 19), you cannot use Just Clock function. Skip steps 4 and 5.

YEAR	2005
DATE	05/07 SAT
TIME	18:56
JUST CLOCK	OFF
TV PROGRAMME	18

SET UP	OK	SELECT WITH [CURSORS]
EXIT	SELECT	THEN PRESS [ENTER]

OR

— you want to change Just Clock setting. ( “Just Clock” in the

right column)

●Turn on the unit.

●Turn on the TV and select the AV mode.

●Slide the TV/DVD switch to DVD.

VHS DVD

ENTER

SET UP

3 Press rt to select “YEAR”, then press ENTER. Press rt to set the year, then press ENTER.

●Repeat the same procedure to set the date and time. When you set the time, press and hold rt to change the time by 30 minutes.

●When you set the date, press and hold rt to change the date by 15 days.

4 Press rt to select “JUST CLOCK”, then press ENTER. Press rt to set to the desired mode, then press ENTER.

●The default setting is “OFF”.

●For the Just clock function, refer to “Just Clock” on the right column.

●If you set to “OFF”, you can disregard the next step as you won’t be able to receive regular clock adjustments.

5 Press rt to select “TV PROGRAMME”, then press ENTER. Press rt to set the channel position to the number representing the station transmitting clock setting data, then press ENTER.

●The unit is preset to receive clock setting and adjustment data from channel position 1.

6 Press SET UP to start the clock operation.

NOTES:

●Just Clock (when set to “ON”) adjusts the unit’s built-in clock every hour, except for 23:00, 0:00, 1:00 and 2:00.

●Just Clock is not effective when:

—the unit’s power is on.

—the unit is in the Timer mode.

—a difference of more than 3 minutes exists between the built-in clock’s time and the actual time.

—the unit is in the Automatic Satellite Programme Recording mode. ( pg. 36) (DVD deck only)

—the unit is in the Power Save mode. ( pg. 79)

—“L-2 SELECT” is set to “SAT VIDEO/RGB” or “SAT S-VIDEO/ RGB”. ( pg. 45)

●If Just Clock is set to “ON”, the unit’s clock is automatically adjusted at the start/end of Summer Time.

●Just Clock may not function properly depending on the reception condition.

Just Clock

The Just Clock function provides accurate time keeping through automatic adjustments at regular intervals, by reading data from a PDC signal.

The Just Clock option can be set to “ON” or “OFF” at the Clock Set screen (the default setting is “OFF”).

IMPORTANT:

If you turn off Just Clock, the accuracy of your unit’s built-in clock may be reduced, which could adversely effect timer recording. We recommend you to keep Just Clock on. In cases where the clock setting data from a PDC signal is incorrect, however, you are advised to keep Just Clock set to “OFF”.