![](/images/new-backgrounds/1279716/27971629x1.webp)
Connections to your TV
Make one of the following connections, depending on the capabilities of your TV.
RF coaxial connection
Connect the RF OUT jack on the Recorder to the antenna in jack on the TV using the supplied
How to set the Recorder’s RF output channel
1.When the Recorder is turned off, press and hold CH (V/v) on the front panel for more than five seconds. [RF03] or [RF04] appears in the display window.
2.Press CH (V/v) to change the RF output channel (RF03 or RF04).
3.Tune the TV to this channel.
Notes:
•Set the resolution to 480p using RESOLUTION or RES. button for progressive signal.
•Progressive Scan does not work with the RF, Audio/Video or
•If your TV does not accept the Progressive Scan format, the picture will appear scrambled.
•If the resolution is set to 720p or 1080i, the VIDEO OUT,
Audio connection
Connect the Left and Right AUDIO OUT jacks on the Recorder to the audio left/right in jacks on the TV using the supplied audio cables (A1 or A2).
Rear of TV
COMPONENT/PROGRESSIVE SCAN | AUDIO INPUT | ||||
INPUT |
| VIDEO INPUT |
|
|
|
| Pr | Pb | Y | R | L |
|
|
|
HOOKUP AND SETTINGS
Video connection
Connect the VIDEO OUT jack on the Recorder to the video in jack on the TV using the video cable supplied (V).
Note:
If you use this connection, set the TV’s source selector to
VIDEO.
Connect the
Component Video / Progressive Scan connection
S
Rear of Recorder
R
CA2
V | A1 |
If your television is a
Connect the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks on the Recorder to the correspon- ding in jacks on the TV using an optional Y Pb Pr cable (C).
Rear of TV
15