![](/images/new-backgrounds/1279716/27971637x1.webp)
Initial Setup Wizard
When POWER is pressed for the first time to turn the unit on, the Initial Setup Wizard function sets the Language, Channels and Clock.
1.Use v / V to select a language for the Setup menu and information display and then press
ENTER.
2.Check your antenna connections. Press B to move next step.
3. Press ENTER to begin the channel search.
4.Select [Auto] or [Manual] Clock Set option then press ENTER.
Auto
1.Use v / V to choose your Time Zone manually.
2.Use B to choose the [Daylight Savings] option. Use v / V to choose Auto, ON, or OFF.
3.Press ENTER to confirm your setting.
Manual
1.Enter the necessary information for year, date and time.
b / B (left/right): Moves the cursor to the previous or next column.
v / V (up/down): Changes the setting at the current cursor position.
2.Press ENTER to confirm your setting.
5.Press ENTER to complete the Setup Wizard.
Note:
You can reset the Initial Setup Wizard from the [Factory Set] in the setup menu.(see page 22).
HOOKUP AND SETTINGS
19