FUNAI DVC860D owner manual Playing a Disc, Auto Rewind, Basic Playback, General Features, Pause

Page 22

AUTO REWIND

REAL TIME TAPE COUNTER

When a tape reaches the end during recording, play- back, or fast-forward, the tape will automatically rewind to the beginning. After rewinding finishes, the VCR will eject the tape and switch itself off.

¡The VCR will not rewind the tape automatically dur- ing timer recording or One Touch Recording.

¡This shows the elapsed recording or playback time in hours, minutes, and seconds. (The displayed time will not change during blank portions of the tape.)

¡The indication will appear when the tape is rewound further than “0:00:00” on the tape counter.

PLAYING A DISC

BASIC PLAYBACK

DVD-V CD

Getting started

¡Turn on the power of the TV, amplifier and any other components which are connected to the DVD.

¡Make sure the TV and audio receiver (commercially available) are set to the correct channel.

¡Select DVD mode by pressing DVD on the remote control or output on the front panel.

1Press POWER.

¡“Load” will appear briefly on the display panel.

2Press OPEN/CLOSE to open disc loading tray.

3Place the chosen disc in the tray, with the label facing up.

Notes

¡A “prohibited icon” may appear at the top-right on the TV screen during operation, warning that a pro- hibited operation has been encountered by the DVD or the disc.

¡With DVDs that use titles for playback program sig- nals, playback may start from the second title, or it may skip these titles.

¡During the playback of a two layered disc, pictures may stop for a moment. This happens when the 1st layer switches to the 2nd layer. This is not a mal- function.

GENERAL FEATURES

DVD may contain menus to navigate the disc and access special features. Press the appropriate Number buttons or use Arrow (L/K/s/B) to highlight your selection in the DVD main menu and press ENTER to confirm.

Note

¡Unless stated, all operations described are based on remote control use. Some operations can be carried out using the menu bar on the TV screen.

4Press PLAY.

¡The tray will close automatically, and playback will then start from the first chapter or track of the disc. If the playback does not start automatically, press PLAY.

¡When you playback the DVD which a title menu is recorded, it may appear on the screen. In this case, refer to “TITLE MENU” on page 23.

5Press STOP to stop playback.

PAUSE

DVD-V CD

1During playback, press PAUSE.

¡Playback will pause and sound will be muted.

2To continue playback, press PLAY.

– 22 –

EN

1L25

Image 22
Contents DVC860D Laser Safety Important Safeguards Symbols Used in this Manual Supplied AccessoriesAbout Copyright Table of Contents IndiceFeatures PrecautionsPlayable Discs About the DiscsFollowing discs can be played back on this Operating Controls and Functions Display Button DVD mode Number Buttons DVD modeVCR mode Button DVD modeSKIP/CH. Buttons DVD mode Play Button DVD modePause Button DVD mode AC Power CordDisplays During Operation DisplayLoading the Batteries VCR/DVD Switching DVD ModeHookups Connecting to a TV Without A/V TerminalsConnecting to a TV with A/V Terminals RF Output Channel for DVD/VCRFor TVs with S-VIDEO Input Jack Connecting to a Receiver with Dolby Digital Decoder Connecting to AN Analog Audio SystemTo Preset the Channels Again SetupAutomatic Channel SET UP To Select a Desired ChannelTo Change the ON-SCREEN Language Clock SET UPTo ADD/DELETE Channels Search Functions Playback FunctionNormal Playback Auto Repeat PlaybackNormal Recording Timer RecordingRecording Function Before recording, make sureTo CHECK, CORRECT, or Cancel AN Automatic Timer Program Hints for TimerTo Stop AN Automatic Timer PRO- Gram Already Started Press STOP/EJECT on the DVD /VCR CombinaTo Monitor the Recording Special FeaturesCopying a Video Tape You can not copy a DVD to a videotapeAuto Rewind General FeaturesPlaying a Disc Basic PlaybackStep by Step Playback Disc MenuTitle Menu Fast FORWARD/REVERSE SearchTitle / Chapter Search ZoomTrack Time SearchRepeat Track RepeatRepeat Title / Chapter Repeat A-BON-SCREEN Information Random PlaybackMP3 Playback Track SelectionProgram Stereo Sound ModeSubtitle Language Audio LanguageParental Level Changing the ON-SCREEN DisplayParental Control ¡The elapsed and remaining Playing time of the currentMarker Setup Screen DVD SetupAudio Setting ¡Be sure to press SETUP, or the setting will not work Black Level SettingDisplay Setting Virtual SurroundLanguage Setting Troubleshooting Guide Problem Corrective ActionMaintenance ServicingSpecifications Controles DEL Funcionamiento Y SUS Funciones Panel DelanteroBotón Play DVD Sólo DVD Botón VCRCambio DE VCR/DVD Modo VCRConexiones PreparaciónReproduciendo UN DVD Video O UN CD Audio Reproducción DE UN DiscoPreparación DE Reloj Para empezarMemo Memo Memo 0VMN03452 H9400UD