VCR Operation (Continued)
Use V to choose the SPEED option.
10 Use b/B to choose the desired recording speed (AUTO, SP or EP).
AUTO mode determines how much tape is left and automatically switches from SP to EP, if necessary, to complete recording of the program. There will be some picture and sound distortion at the point of the speed change.
Use V to choose the REPEAT option.
11 Use b/B to choose the desired repeat (ONCE, WEEKLY or DAILY).
ONCE event....for recording a single event.
WEEKLY event....for recording an event on a certain
day every week.
DAILY event....for recording an event at the same time
Monday through Friday.
Checking (Erasing) Timer Record Programming
Programming can be checked whenever the DVD+VCR is turned on.
1Press MENU to display the MAIN menu.
2Use v/V to choose the PROGRAM menu.
Press ENTER and the PROGRAM menu will appear.
3Use b/B to select a program you want to check or erase. If you want to erase the program, press
CLEAR.
4Press MENU to return to the TV screen.
ip
If the input data is wrong, use v to select the data and correct it using b/B.
Press MENU. The program will be memorized
12 by the DVD+VCR.
The 
indicator lights on the front panel display.
If the program time has past, the PAST TIME PRO- GRAMMED message will appear on the TV screen. Return to the incorrect program and program it with the correct time.
If you have entered a past date, the timer recording will be performed on that date of the next year. Additional programs may be entered by repeating steps
Cable Users: If your cable hookup is via a TV converter box, you can program multiple recordings only on the converter box output channel. This is because the converter determines what channel you view through your DVD+VCR.
ip
If you are finished programming and you want to set the DVD+VCR to record the programs you have entered,
MAKE SURE YOU HAVE INSERTED A TAPE INTO THE DVD+VCR. The DVD+VCR is now set to record the preset programs.
otes
If the power fails or the DVD+VCR is unplugged from the AC outlet, the correct clock time and timer settings are kept in memory for approximately 3 seconds. After 3 seconds, the clock and program timer must be reset when power is restored. Reset the clock according to the instructions.
After setting up a timer recording, recording will start if no other timer recordings are scheduled to occur at the same time (see “Program Priority” at right).
Program Priority
If the starting and ending times of two or more timer
recordings overlap on the
same day, priority is given to
the earliest recording. For
example, in the diagram at
left Program number 2 will not be recorded until
Program number 1 is finished. The first part of Program number 2 will not be recorded. Likewise, Program num- ber 3 will not be recorded until Program number 2 is fin- ished, and so on.
24