Emerson EWD2003 owner manual Troubleshooting Guide, Problem Corrective Action

Page 32
Playback picture is partially noisy
Cannot view a tape but the audio is OK.
No, or poor, playback picture.

TROUBLESHOOTING GUIDE

If the DVD/VCR COMBINATION UNITS does not perform properly when operated as instructed in this Owner's Manual, check the player consulting the following checklist.

D

 

PROBLEM

CORRECTIVE ACTION

V

 

No power.

• Make sure the power plug is connected to an AC outlet.

D

 

 

• Make sure the power is turned on.

 

The player does not respond to. • Check if the power plug is connected to an AC outlet.

 

Vthe remote control.• Check the batteries in the remote control.

C

• Aim the remote control directly at the remote sensor. If necessary, remove all the

obstacles between the sensor and the remote.

R

• You have to be within 23 feet of the player.

 

 

 

 

• Check if the correct mode is selected. If not switch the mode by pressing DVD or

 

 

 

VCR ,whichever you need, on the remote control.

 

 

 

• Check if a cassette tape is in the VCR.

 

 

Timer recording is impossible.

• Make sure the timer recording is set correctly.

 

V

 

 

• Make sure the power is off.

 

C

 

• Make sure the VCR clock is set correctly.

RCannot go into Record mode. • Make sure the tape has a safety tab. If needed, cover the hole with cellophane tape.

•Put he player in VCR mode. Press VCR on the remote control so that the green VCR OUTPUT light is lit.

• Adjust tracking control for a better picture by pressing CHANNEL (UP/DOWN) on the

DVD/VCR COMBINATION UNITS.

• Head cleaning may be necessary. Refer to “AUTO HEAD CLEANING” .

• Make sure the VCR is not in the Menu mode.

• Change the RF output channel to CH4. Then select the same channel on the TV.

 

 

 

 

• Fine tune your TV.

 

 

 

TV programs cannot be seen

• Re-check the ANT. IN and ANT. OUT connections. See page 13.

 

 

 

normally.

• Press VCR/TV.

 

 

 

 

• Press VCR on the remote control to put it in the VCR mode. Check if the green VCR

 

 

 

 

OUTPUT light is lit. Then, set it to the TV position by pressing VCR/TV.

 

 

 

Video or color fades in and out

• You cannot copy a copyrighted video tape. You are experiencing copy guard protection.

 

 

 

when making a copy of a video tape.

 

 

 

 

 

 

 

 

 

 

 

Cannot remove the tape.

• Check if the player is in the VCR mode. If not, press VCR on the remote control to switch

 

 

 

 

the mode.

 

 

 

No picture.

• Connect the video cables firmly.

 

D

 

V

 

 

• Insert a correct video disc that plays on this player.

 

 

 

• Press DVD on the remote control. Check if the DVD OUTPUT Light is lit. Then try other

 

D

 

 

DVD feature.

 

 

 

Disc cannot be played.

• Insert the disc.

 

 

 

 

 

 

• Clean the disc.

 

 

 

 

• Place the disc correctly, with the label side up.

 

 

 

 

• Cancel the parental lock or change the control level.

 

 

 

No sound.

• Connect the audio cables firmly.

 

 

 

 

• Turn the power of the audio component on.

 

 

 

 

• Correct the audio output settings.

 

 

 

 

• Correct the input settings on the audio component.

 

 

 

No DTS audio is output.

• This player does not support DTS audio. This is not a malfunction.

 

 

 

Distorted picture.

• Connect the player directly to the TV.

 

 

 

 

• There are some cases where pictures may be slightly distorted, which are not a sign of a mal-

 

 

 

 

function.

 

 

 

 

• Although pictures may stop for a moment, this is not a malfunction.

 

 

 

Audio or subtitle language

• The selected language is not available for audio or subtitles on the DVD.

 

 

 

 

does not match the set up

This is not a malfunction

 

 

 

 

The camera angle cannot be

• The DVD does not contain sequences recorded from different camera angles.

 

 

 

changed

This is not a malfunction

 

 

 

Audio or subtitle language

• The DVD does not contain audio source or subtitles in the selected language.

 

 

 

 

cannot be changed

This is not a malfunction.

 

 

 

“Prohibited icon” appears on the • That operation is prohibited by the player or the disc.

 

 

 

 

screen, prohibiting an operation

This is not a malfunction.

Notes

Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner’s Manual for details on correct operations.

¡Playback from a desired track and random playback are not available during program playback.

– 32 –

EN

1L25

Page 31 Page 33
Image 32
Page 31 Page 33
Contents EWD2003 Laser Safety Important Safeguards About Copyright Supplied AccessoriesSymbols Used in this Manual Table of Contents IndiceFeatures PrecautionsAbout the Discs Playable DiscsFollowing discs cannot be played back on this ExampleOperating Controls and Functions +10 Bers during channel preset Press to accept a settingPress to select VCR mode for the remote control Use to select VCR or TV positionLoading the Batteries Connect your antenna, Cable Box, or Direct Broadcast SystemVCR/DVD Switching Switching to DVD ModeConnecting to a TV HookupsDVD/VCR to TV Connection If your TV does not have A/V terminalsFor TVs with S-VIDEO Input Jack Connecting to a Dolby Digital Decoder Connecting to AN Analog AudioSetup Automatic Channel SET UPTo Preset the Channels Again To Select a Desired ChannelTo ADD/DELETE Channels Clock SET UPTo Change the ON-SCREEN Language Playback Function Normal PlaybackAuto Repeat Playback Search FunctionsTimer Recording Recording FunctionNormal Recording Accidental Erasure PreventionHints for Timer Recording To Stop AN Automatic Timer PRO- Gram Already StartedTo CHECK, CORRECT, or Cancel AN Automatic Timer Program ¡You can use the DVD player while the Timer lightSpecial Features Copying a Video TapeAuto Rewind Real Time Tape CounterGeneral Features Playing a DiscBasic Playback PauseDisc Menu Title MenuStep by Step Playback Fast FORWARD/REVERSE SearchZoom Title / Chapter SearchTrack Time SearchRepeat Repeat Title / ChapterRepeat Track RepeatRandom Playback MP3 PlaybackON-SCREEN Information Track SelectionStereo Sound Mode Subtitle LanguageProgram Audio LanguageChanging the ON-SCREEN Display Parental ControlParental Level ¡The elapsed and remaining Playing time of the currentDVD Setup Marker Setup ScreenAudio Setting When playing disc with copyright ProtectionBlack Level Setting Display Setting¡Be sure to press SETUP, or the setting will not work Virtual SurroundLanguage Setting Troubleshooting Guide Problem Corrective ActionMaintenance Make your contribution to the environmentSpecifications Controles DEL Funcionamiento Y SUS Funciones Panel DelanteroBotón Play DVD Notas Botón g Modo DVDCambio DE VCR/DVD Cambio AL Modo VCRConexiones PreparaciónReproducción DE UN Disco Preparación DE RelojReproduciendo UN DVD Video O UN CD Audio ¡Para retroceder un paso, presioneMemo Memo Memo H94 20UD Tel0VMN03884

EWD2003 specifications

The Emerson EWD2003 is a cutting-edge temperature control device designed to enhance monitoring and management in industrial environments. Known for its reliability and precision, this device is utilized in a variety of applications, including HVAC systems, food processing, and environmental monitoring.

One of the standout features of the Emerson EWD2003 is its robust temperature sensing capabilities. It employs advanced sensor technology, which ensures accurate readings and responsiveness to temperature fluctuations. The device can accommodate various sensor types, such as thermocouples and RTDs, making it versatile and adaptable to differing setups.

The EWD2003 supports a broad temperature range, making it suitable for both low and high-temperature environments. Its digital display provides real-time data, allowing users to monitor conditions at a glance. Additionally, the device includes built-in alarm functionalities that alert users to any temperature deviations beyond preset thresholds, ensuring proactive management of potential issues.

Connectivity is another significant technology feature of the Emerson EWD2003. With options for both wired and wireless communications, the device can seamlessly integrate into existing monitoring systems. It supports protocols like Modbus, making it compatible with various industrial automation systems. This connectivity enhances data logging, enabling users to track historical trends and make informed decisions based on empirical data.

The EWD2003 also emphasizes user-friendliness. Its intuitive interface simplifies setup and configuration, reducing installation time. The device can be tailored to fit specific user needs, with programmable settings that allow for customization based on the requirements of the application.

In terms of characteristics, the Emerson EWD2003 is constructed for durability. Its robust design ensures it can withstand harsh industrial environments, while the quality components contribute to a longer lifespan. The device operates with energy efficiency in mind, reducing operational costs for businesses.

In conclusion, the Emerson EWD2003 stands out in the market for temperature control solutions. Its combination of accurate sensing, extensive connectivity options, user-friendly interface, and robust design makes it an ideal choice for industries that require precise temperature management. Whether for critical process monitoring or routine temperature checks, the EWD2003 is engineered to meet the demands of modern industrial applications.
Top Page Image Contents