Daewoo DCR-9120 owner manual VCR Playback Tuning in New Stations

VCR Playback

Tuning in New Stations

1	Press [ ] button to power on.
	Press [VCR] button of remote control to change into VCR mode.

■The TV and player are switched on.

■To see the picture from your player, press the station button on the TV reserved for player input or the AV

2	Insert the desired tape.
3	If you want to playback it, press [PLAY/PAUSE] button.
	When the operational status is flickering or poor, adjust it with [TRACKING +/–] button.

(Audio / Video) button.

■"AV1/2" should not be selected with the AV button on the player.

Tuning

To complete the set-up of your video recorder when the auto set

1 has not stored all of the channels or when you wish to store a new channel.

PR PRESET

AUTO SET

MANUAL SET

PR ERASE

VCR Operation

4	To stop it, press [	] button.
	For pause, press [PLAY/PAUSE] button in playback mode.
	If you press this button once more, it starts playback again.
5	Press [EJECT] button in the front part or [OPEN/CLOSE] button on
	remote control to remove the tape.

2

Call the video’s "SETUP", choose "PR PRESET".

Select "MANUAL SET".

PR ALIGN

…/†:SELECT

OK:CONFIRM SETUP:END

MANUAL SET

PR01 ARD	PR08 P-08
PR02 ZDF	PR09 P-09
PR03 P-03	PR10 P-10
PR04 P-04	PR11 P-11
PR05 MTV	PR12 ----
PR06 P-06	PR13 ----
PR07 P-07	PR14 ----

…/†:SELECT

OK:CONFIRM SETUP:END

If the product, which has a auto-detector, detects a contaminated head(s), it shows the conditions to notice the contamination on screen.

*In case of the notice on screen, please rub the heads with a head- cleaner followed by “How to use a head- cleaner”.

Various Playback Methods

■If you want fast forward (or reverse) playback, press [√√] or [œœ ] button in

Playback mode. You can watch fast playing (rewinding) screen.

■If you want Still picture, press [PLAY/PAUSE] in Playback mode. You can watch the desired screen in pause status.

■If you want slow-motion playback, press [ ❚√] button in Playback mode. You can watch the desired screen in the slow forward playback.

*NOTE: VCR doesn’t have Slow Reverse Playback function.

■If you want to watch a series of screens one by one (FRAME ADVANCE), press [❚√] button in Pause mode. Each time you press this button, the picture advances one frame.

To Adjust Display

This product includes automatic Tracking function and enables users to enjoy clear picture without an additional operation. Provided that the following problems can be solved by the manual adjustment, which improves display quality. (During automatic display adjustment, “Adjusting Display” are displayed on TV screen.)

-If the screen is poor in Playback mode,

-If noises occur in the upper or lower part of screen in slow playback mode,

-If paused picture vibrates up and down.

Use [TRACKING +/–] buttons of remote control to adjust the display suitable for watching.

3	Choose any unused location number "----" or "P-xx" ...
	It's simplest to use the same location number on both the TV and
	video.
	... and confirm.
4	Set the station you want:
	•	the programme location number;
	•	the broadcast system you want (Aerial(CH) or Cable(CC)),
	•	You can directly enter the real channel number with the [0 to 9]
		buttons, or search by pressing [œ/√],
	•	The fine tuning you can adjust,
	•	When the program is encoded (and you have a decoder
		connected to socket EURO AV2), press the [œ or √] to select
		ON or OFF.
	•	Change or create the station name.
5	Once you see the station you want, store it.
	Tune in further stations (from step 3 onwards) or exit tuning mode.

MANUAL SET

PR	04
RECEPTION	AERIAL
AUTOSEARCH	CH_ _
FINE TUNING
DECODER	ON
NAME	_ _ _ _
…/†: UP/DOWN
œ/√: SELECT
OK:CONFIRM		SETUP:END
MANUAL SET
PR	03
RECEPTION		AERIAL
AUTOSEARCH		CH 03
FINE TUNING
DECODER		ON
NAME	_ _ _ _
…/†: UP/DOWN
œ/√: SELECT
OK:CONFIRM		SETUP:END

MANUAL SET

PR	03
RECEPTION	AERIAL
AUTOSEARCH	CH_ _
FINE TUNING
DECODER	ON
NAME	_ _ _ _
…/†: UP/DOWN

0/1: CHANGE/CREATE

OK:CONFIRM SETUP:END

22 23