Dynaudio Evidence owner manual Unpacking the Loudspeakers, Heavy Parts

Unpacking the Loudspeakers

Fig. 1 Packaging (Temptation and Center models only, figure shows Temptation).

Unpacking the Loudspeakers

Dynaudio Evidence models are protected during transit by stable and secure packaging. Due to their weight and dimensions, they are shipped in a special wooden crate.

CAUTION HEAVY PARTS

Unpacking the Evidence loudspeakers without help may cause personal injuries or product damage.

XConsult your trained Dynaudio dealer for assistance.

XTwo people are recommended to unpack the loudspeakers.

To unpack the Evidence Master loudspeakers:

XPlease consult your Dynaudio dealer.

To unpack the Temptation and Center models:

1.Lay the transport box flat on the floor.

2.Remove the screws along the top plate, the top plate and the five safety pads.

3.Remove the screws along the bottom plate.

4.Carefully lift the sidewall frame.

5.Carefully remove the loudspeaker by lifting it up horizontally.

6.Turn the loudspeaker and slowly place it on its plinth.

7.Remove the wrapping foil by lifting it on one end and unwrap it in a clock-wise motion. Do not use blades, cutters or any other sharp objects that will destroy the foil.

8.Fix the sidewall frame on the bottom plate again.

9.Place the wrapping and the safety pads back into the box and close the plate.

The wooden transport crates and custom cartons are intended for long-term use and should be used whenever the loudspeakers are to be transported, and as such they should be stored for future use.

Dynaudio Evidence 5