Dynaudio Evidence owner manual Connecting the loudspeakers

Page 6

Connecting

Connecting

Fig. 2 Binding posts at rear of cabinet.

Connecting the loudspeakers

1.Connect a two-pole (+/-) loudspeaker cable to the binding posts, located at rear of the cabinet (see Fig. 2). The high quality, gold plated binding posts can accommodate different connection systems:

–4-mm-plugs (“banana plugs”): The pins can be put directly into the binding post without any tightening necessary.

–Cable spades: Un-tighten the binding posts, insert the spade into the opening, and secure the spade by tightening the posts.

–Bare wires: Un-tighten the binding posts and place the cable into the binding posts. Tighten the posts.

Note:

•With every connection system, ensure that the contact is tight and has a proper contact area.

•Connectors with similar gold plating as the loudspeakers binding posts will typically offer the best results and remain corrosion-free.

•Please ensure that the positive and negative cables do not make contact with each other.

•Tighten the posts, and check the contact after a few days to make sure that it hasn’t loosened.

6	Dynaudio Evidence

Image 6

Contents Evidence Content Inhalt Used expressions and symbolsIntroduction About this guide Safety InstructionsUsed expressions and symbols High Sound Pressure LevelsTo unpack the Evidence Master loudspeakers Unpacking the LoudspeakersHeavy Parts To unpack the Temptation and Center modelsConnecting Connecting the loudspeakersConnecting surround speakers Bi-wiring/bi-ampingChoice of loudspeaker cable Excessive Brightness PositioningGeneral recommendations ≤ B≥ 0.5 m Distance to back and side wallsFloor-standing loudspeaker set-up Spikes with Sharp PeaksLoudspeaker Toe-In Room and furniture influenceGrille Multi-Channel Setup Loudspeakers for multi-channel setupsCenter speaker Multi-channel loudspeaker setup Rear speakersSubwoofer Running-in / Care & Maintenance Distorted Output SignalsWarranty Aggressive Cleaning FluidsCleaning the loudspeakers Einleitung Zu dieser Anleitung Verwendete Begriffe und SymboleSicherheitshinweise Hohe SchallpegelAuspacken der Evidence Master Lautsprecher Auspacken der LautsprecherSchwere Lautsprecherelemente Auspacken der Temptation und Center ModelleAnschließen Lautsprecher anschließenHinweise Surround-Lautsprecher anschließen Wahl des LautsprecherkabelsHinweis Aufstellen Allgemeine EmpfehlungenIntensive Lichteinwirkung Abstand zu Rückwand und Seitenwänden Standlautsprecher aufstellenSpikes MIT Spitzen Enden Auf den Hörplatz ausrichten WohnraumeinrichtungFrontabdeckung Mehrkanal-Anlage Lautsprecher für eine Mehrkanal-AnlageCenter-Lautsprecher Aufstellen der Mehrkanal-Lautsprecher Rear-Lautsprecher hintere LautsprecherVerzerrte Verstärkersignale Inbetriebnahme / PflegehinweiseGarantie Aggressive ReinigungsmittelDie Lautsprecher reinigen Technical Specifications / Technische Daten Brochures / Broschüren