DirecTV pmn manual Controlling Directv Receiver, Programming Directv Remote

CONTROLLING DIRECTV RECEIVER

The DIRECTV Universal Remote Control is designed to give you access to features and functions found on your original remote control. To use it with your brand of DIRECTV Receiver, you will need to program the remote control by per- forming the following steps.

Programming DIRECTV Remote

1.Locate the DIRECTV Receiver's brand and model num- ber (on the back or bottom panel) and write it in the spaces below.

2.Locate the 5-digit code for your DIRECTV Receiver (see page 10).

3.Power on the DIRECTV Receiver.

4.Move the slide switch to DIRECTV icon.

5.Press and hold in the MUTE and SELECT keys until the green light under the DIRECTV icon flashes twice and then release both keys.

6.Using the number keys enter the 5-digit code. If per- formed correctly the green light under the DIRECTV icon will flash twice.

7.Aim the remote at your DIRECTV Receiver and press that the power key once. The DIRECTV Receiver should turn off. If it does not turn off, repeat steps 3 and 4, try- ing each code for your brand until you find the correct code.

8.For future reference write down the working code for your DIRECTV Receiver in the blocks below:

DIRECTV CODE:

BRAND:

MODEL:

9