![](/images/new-backgrounds/1279725/27972515x1.webp)
C O N N E C T I O N S
Follow these steps to connect the DVD+VCR to your television and antenna/cable TV.
From Antenna or Cable TV
To Television | To Line Inputs on |
| your Television |
| (Optional) |
B A S I C
1C O N N E C T A N T E N N A / C A B L E T V
Connect the RF coaxial cable from your indoor/outdoor antenna or cable wall outlet to the IN (FROM ANT.) jack on the back panel of the DVD+VCR.
2C O N N E C T D V D + V C R T O T V
R F C o n n e c t i o n
Connect the supplied RF coaxial cable from the ÒOUT (TO TV)Ó jack on the DVD+VCR back panel to your televisionÕs antenna in jack. Use this connection if your television is equipped with a basic antenna input.
OR
L i n e C o n n e c t i o n
3S E T D V D + V C R O U T P U T C H A N N E L
If you used the RF connection in Step 2, set the CH (Channel) switch on the back panel of the DVD+VCR to 3 or 4, whichever is not an active channel in your area. If you used the Line Connec- tion, skip to Step 4.
4P L U G I N D V D + V C R
Connect the DVD+VCR power cord to a standard 120V/60Hz wall outlet.
5T U R N O N T V A N D D V D + V C R
Turn on your television, and press POWER on your DVD+VCR.
6 S E T T V T O C H A N N E L 3 , 4 ,
O R L I N E
N O T E S
Connect the supplied stereo A/V cable from the ÒLine OutÓ jacks on the DVD+VCR back panel to your televisionÕs Line In jacks. Be sure to match yellow to video, red to right audio and white to left audio on your television and DVD+VCR. Use this connection for better sound and picture quality if your television is equipped with line inputs.
Set your TV to the same channel you selected in Step 3. If you used the Line Connection, set your TV to its Line input.
¥The ÒLanguage/Langue/IdiomaÓ menu should appear on the screen.
¥Please proceed with Auto Setup on the following page.
•For Advanced Connections, please refer to Appendix A.
•Even if you plan to use the
2 |