Axion 16-3350 instruction

1.CARD/TV/AUX Switch ― Video signals from video equipment connected to the audio/video input can be displayed on the monitor by pressing this button. Each time the button is pressed, the audio/video source will change.

2.POWER On/Off ― Turns the power of the unit on and off.

3.Numbers 0-9― Use for direct entry of channel numbers. To select channel numbers above 99 when in CATV mode, press 1 ― key followed by the two digit number (up to 25) that you wish to jump to. For example: 1 ― 22 will take you to channel 122.

4.TV/CATV Select ― Use to select regular VHF/UHF air broadcast TV or 125 channel cable TV.

5.MUTE ― Temporarily shuts off the audio coming from the speakers or headphones.

6.PICTURE Select ― Each time you press this button,, the on-screen picture adjustment will display the “adjustment bars” for Contrast, Brightness, Color, Tint, Sharpness, Language and Factory Reset. Once the desired adjustment bar is displayed, use the VOLume + or - buttons to adjust the setting. The display will automatically turn off if no adjustments are made within 10 seconds, or if the picture button is pressed several times.

7.VOLume +Up/–Down― Use to adjust the volume of the audio coming from the TV/DVD unit and to increase and decrease certain settings within the on-screen setup menus.

8.TV Channel AUTO MEMORY ― Press this button to begin the auto channel setup.

9.TV Channel SKIP SEARCH ― Press this button to toggle between skip on and skip off. When on, the TV will only tune to the channels that were set up using the Auto Memory search. When off, the TV will tune all channels regardless of Auto Memory search settings.