J. Watching TV
1.Connect the coax cable line to the supplied Right angle adapter. Insert the supplied Right angle adapter into the coax input located on the bottom left side of the unit.
2.With power supplied to the system and the TV mode selected, press TV/CATV on the remote control to select the regular
Note: Please contact your local cable provider to verify your cable access.
3.Press AUTO MEMORY to search and tune all channels in TV or CATV mode. The channels with signals detected are automatically stored.
4.Use SKIP/SEARCH to select between SKIP and SEARCH mode. In SKIP mode, the TV only stops on channels that are programmed into memory when the CH +/– buttons are used. When SKIP mode is off, the TV will stop on all active channels.
5.To erase a TV channel, press ERASE/WRITE until the channel number displayed on the screen turns red. To store a TV channel, press this button until the channel number displayed on the screen turns green. The stored channel numbers are displayed in green on the screen while the
24