Simple Troubleshooting
Simple Troubleshooting
Performs
SYMPTOM | DEALING METHOD |
| Check the power connection. |
NO POWER | Pull the plug out, wait for 60 seconds, then reconnect the power |
| and run the set |
NO PICTURE | Check the antenna connection. |
Try other TV channel due to the TV station problem. | |
| Modify the brightness or contrast setting. |
| Increase the volume. |
NO SOUND | Check that if the set is on the mute state or not. |
| Check the voice setting condition. |
| Check the voice mode setting condition. |
|
|
ABNORMAL COLOR | Check the antenna connection |
|
|
NO RESPONSE OF THE | Check the effect of the batteries, if needed, please replace the |
REMOTE CONTROL | batteries or clean the remote sensor window. |
| The distance between the set and the remote control should be |
| less than 6 meters. |
|
|
The SCREEN FLASH IN | The parameter is too big. |
VGA MODE | Please use safety mode when restart the PC, and set the |
| parameter of the monitor according to the instruction. |
|
|
SOME INTERFERE IN THE | Please modify parameter of the monitor according to the instruction. |
VGA MODE |
|
|
|
CLEAN THE TV SET | Please pull the plug out when clean the LCD screen. Using soft, |
| clean cloth to wipe it off. If need to clean further, please use dry |
| cloth, don’t use naphtha or other thinner liquid. |
|
|
COLOR SPOT | This product uses high definition LCD panel, and the panel |
| has its special character, there maybe existed some color |
| spots, so when the user find few color spots it's not a quality |
| problem. |
| The standard for inspecting this panel is the same which is |
| out of the scope to replace the product. |
|
|
19