LG Electronics W2353V, W2253V manual On Cleaning, On Repacking, On Disposal

Page 3

Important Precautions

Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.

Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation. If these openings are blocked, built-up heat can cause failures which may result in a fire hazard. Therefore, NEVER:

Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc. Place the display in a built-in enclosure unless proper ventilation is provided.

Cover the openings with cloth or other material.

Place the display near or over a radiator or heat source.

Do not rub or strike the Active Matrix LCD with anything hard as this may scratch, mar, or damage the Active Matrix LCD permanently.

Do not press the LCD screen with your finger for a long time as this may cause some afterimages.

Some dot defects may appear as Red, Green or Blue spots on the screen. However, this will have no impact or effect on the display performance.

If possible, use the recommended resolution to obtain the best image quality for your LCD display. If used under any mode except the recommended resolution, some scaled or processed images may appear on the screen. However, this is characteristic of the fixed-resolution LCD panel.

Leaving a fixed image on the screen for a long time may cause damage to the screen and cause image burn-in. Make sure to use a screen saver on the product. Burn-in and related problems are not covered by the warranty on this product.

Do not shock or scratch the front and sides of the screen with metallic objects. Otherwise, it may cause damage to the screen.

On Cleaning

Unplug the display before cleaning the face of the display screen.

Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display screen because over-spraying may cause electrical shock.

On Repacking

Do not throw away the carton and packing materials. They make an ideal container in which to transport the unit. When shipping the unit to another location, repack it in its original material.

On Disposal

The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with general household waste.

Disposal of this product must be carried out in accordance to the regulations of your local authority.

A2

Image 3
Contents W2253V W2353V Important Precautions On SafetyOn Installation On Cleaning On RepackingOn Disposal Connecting the stand Connecting the DisplayDisassembling the stand Tilt Range -5˚~15˚ Ergonomic Positioning your displayConnect Hdmi Cable Using the ComputerOpen OSD LOCKED/UNLOCKED Control Panel FunctionsFront Panel Controls BRIGHT,TIME CONTROL,LIVE SENSOR,SMARTButton For more information, refer to page A19 -A20 Auto Image AdjustmentScreen Adjustment On Screen Display OSD Control AdjustmentMain menu Sub-menu Reference On Screen DisplayOSD Selection and AdjustmentButton Tip Menu Name Icons Sub-menus Green PresetBrightness Contrast Gamma REDTracking Clock PhasePosition IndicatorReset Language OSDLive Sensor SmartWide EZ ZoomingSepia VolumeNormal Gaussian BlurA19 User No image appears TroubleshootingDisplay image is incorrect Have you installed the display driver? Display Specifications W2253VEnvironmental Conditions Specifications W2353VSpecifications Preset Modes ResolutionIndicator Digitally yours
Related manuals
Manual 29 pages 34.9 Kb Manual 28 pages 7.18 Kb