Smart Classroom Operations Guide | Academic Computing - College of Charleston | revised: 1/10/2005:jpva |
If….
•The Computer will not turn on
Then try the following steps…
1)CHECK the POWER SWITCH located INSIDE THE RIGHT CABINET OF THE NOVA STATION. It should light up RED to indicate that the computer is receiving power
2)If the Nova station has power, reset the computer by pressing the reset button on the front of the computer.
Power Switch
3)CHECK THE WALL OUTLET to make sure that the power is plugged in from the Nova Desk.
4)Check to make sure that the power connection in the back of the computer is firmly seated.
5)If you are unable to resolve the problem, CALL THE HELPDESK AT
If….
•The computer is on but the image is NOT projecting on the screen
•The VCR is not projecting on the Screen
•The Projector Remote Control Unit does not work
•The Projection Unit will not turn on
Then try the following steps…
1)Turn the projector bulb on by pressing the Standby/On (green) button on the remote control.
2)When turning on the projector, it takes about 30 SECONDS TO DISPLAY AN IMAGE. If the IMAGE DOES NOT APPEAR after 30 Seconds:
3)Turn off the fluorescent lights in the room (they can cause interference with the remote) and begin at step 1.