01. Power (Command2:a)
To control Power On/Off of the TV.
Transmission |
|
| |
[[k][a][ | ][Set ID][ | ][Data][Cr] | i |
Data | 0 • Power | Off | 1 • Power On |
Acknowledgement |
|
| |
i[a][ ][Set ID][ ][OK][Data][x] | i | ||
*In a like manner, if other functions transmit 'FF'data based on this format, Acknowledgement data feedback presents status about each function.
02. input Select (Command2:b) (Main Picture input)
To select input source for the TV.
You can also select an input source using the TV/VIDEO button on the TV'sremote control.
Transmission
m | ][Set ID][ | ][Uata][Cr] | 1 |
| ||
I[k][b][ |
|
| ||||
Data | 0 | :TV |
|
| 4 | • Component 2 |
| 1 | : Video | 1 |
| 5 | • RGB |
| 2 | : Video | 2 |
| 6 | • DVI |
| 3 | : Component | 1 |
|
| |
Acknowledgement |
|
|
|
| ||
I[b][ | ][Set | ID][ ][OK][Data][x] |
|
| ||
L |
|
|
|
|
|
|
03.Aspect Ratio (Command2:c) (Main picture format)
I_ To adjust the screen format.
You can also adjust the screen format using the ARC (Aspect Ratio Control) button on remote control or in the Screen menu.
Transmission
[[k][c][ ][Set IU][ | ][Uata][Cr] | i | ||
Data 0 | : Normal screen | (4:3) | ||
1 | : Wide | screen (16:9) | ||
2 | : | Horizon |
| |
3 | : | Zoom |
|
|
Acknowledgement |
| ||
[[c][ | ][Set ID][ | ][OK][Data][x] | ! |
04. | Screen | Mute (Command2:d) |
|
To select screen mute on/off.
Transmission
[[k][d][ ][Set ID][ ][Data][Cr]I
Data 0 : Screen mute off (Picture on) 1 : Screen mute on (Picture off)
Acknowledgement |
|
[[d][ ][Set IU][ ][OK][Uata][x] | I |
External Control Device Setup
05.Volume Mute (Command2:e)
I_ To control volume mute on/off.
You can also adjust mute using the MUTE button on remote control.
Transmission
I[k][e][ ][Set IU][ ][Uata][Cr] | ] |
Data 0 : Volume mute on (Volume off) 1 : Volume mute off (Volume on)
Acknowledgement
I[e][ ][Set ID][ ][OK][Data][x] | ] |
06. Volume Control (Command2:f)
To adjust volume.
You can also adjust volume with the volume buttons on remote control.
Transmission
[[k][f][ ][Set ID][ ][Data][Cr] | I |
Data
® Refer to 'Real data mapping 1'as shown below.
Acknowledgement
[[f][ ][Set ID][ ][OK][Data][x] | I |
07. Contrast (Command2:g)
To adjust screen contrast.
You can also adjust contrast in the Picture menu.
Transmission
I[k][g][ ][Set ID][ ][Data][Cr] | ] |
Data
® Refer to 'Real data mapping 1'as shown below.
Acknowledqement |
| ||
[[g][ | ][Set IU][ | ][OK][Uata][x] | 1 |
08. | Brightness | (Command2:h) |
|
To adjust | screen brightness. |
| ||
You can also | adjust brightness | in the Picture menu. | ||
Transmission |
|
|
| |
[[k][h][ | ][Set | ID][ | ][Data][Cr] | I |
Data | Min:O_Max:64 |
| ||
® Refer to 'Real data mapping 1'as shown below.
Acknowledgement
i[h][ ][Set IU][ ][OK][Uata][x] | i |
*Real data mapping 1 0 Step 0
A Step 10 (SET ID 10)
FStep 15 (SET ID 15)
10 Step 16 (SET ID 16)
63Step 99 (SET ID 99)
64Step 100
Owner's Manual 35