Connecting PC as monitor
Connecting PC as monitor
Picture adjustment
You can adjust picture Contrast, Brightness, Horizontal/Vertical position, Clock, Phase, Auto and Reset as you prefer.
1.Press the TV/AV button to select the PC mode.
2.Press the MENU button.
3.Press the PRxy button to select the desired picture item.
4.Press the VOLÏq button to make appropriate adjustments.
Contrast | Clock |
Brightness | Phase |
Temperature | AUTO Auto |
Reset | |
|
Contrast
This function is to adjust picture to light/dark.
Brightness
This function is to adjust brightness of picture.
Temperature
Temperature is a measure of the warmth of the image color.
Horizontal Position/Vertical Position
This function is to adjust picture to left/right and up/down as you prefer.
Clock
This function is to minimize any vertical bars or stripes visible on the screen background. And the horizontal screen size will also change.
Phase
This function allows you to remove any horizontal noise and clear or sharpen the image of characters.
Auto
This function is for the automatic adjustment of the screen position, clock and clock phase. The displayed image will disappear for a few seconds while the
Note: Some signal from some graphics boards may not function properly. If the results are unsatisfactory, adjust your monitor’s position, clock and clock phase manually.
Reset
This function allows you to return to the good picture reproduction programmed at the factory and cannot be changed.
Contrast
x
0 Ï 90 q 100
y
AUTO
1024 X 768
▲▼ ◀▶ MENU%%TV/AV
POWER
SSMPSM
I/II Q.VIEW
MENUTV/AV
PRV
CVOL OK VOLB
PRW
TEXT/MIX SIZE SLEEP INDEX
UPDATE TIME REVEAL
PC/DTV INPUT
1. Connect the PC IN cable (D sub jack) from the monitor output socket of the PC to the PC/DTV input socket of the set.
2. Connect the PC Audio IN cable from the PC to the PC Audio IN of the set.
3.Press the TV/AV button to select PC mode.
4.Switch on the PC, and the PC screen appears on the set.
The set can be operated as the PC monitor.
Note : If you have an Apple Macintosh, connect the VGA desktop block from the 3 rows 15 pin to 2 row 15 pin with the signal cable and connect the XGA desktop block to the Macintosh.
Resolution
Mode | Resolution | Horizontal | Vertical | |
frequency (KHz) | frequency (Hz) | |||
|
| |||
| 640X480 | 31.5 KHz | 60 Hz | |
| 640X480 | 35 KHz | 67 Hz | |
VGA | 640X480 | 37.9 KHz | 72 Hz | |
640X480 | 37.5 KHz | 75 Hz | ||
| ||||
| 640X480 | 43.5 KHz | 85 Hz | |
| 720X400 | 31.5 KHz | 70 Hz | |
| 800X600 | 35.2 KHz | 56 Hz | |
SVGA | 800X600 | 37.9 KHz | 60 Hz | |
800X600 | 48.1 KHz | 72 Hz | ||
| 800X600 | 46.9 KHz | 75 Hz | |
(MAC) | 800X600 | 53.7 KHz | 85 Hz | |
832X624 | 49.7 KHz | 75 Hz | ||
| 1024X768 | 48.4KHz | 60Hz | |
XGA | 1024X768 | 56.5 KHz | 70 Hz | |
1024X768 | 60.2 KHz | 75 Hz | ||
| ||||
| 1024X768 | 68.7 KHz | 85 Hz | |
|
|
|
|
Note:
a. If the set is cold, there may be a small “flicker” when the set is switched on. This is normal, there is nothing wrong with the set.
b. Some dot defects may appear on the screen, like Red, Green or Blue spots. However, this will have no impact or effect on the monitor performance.
5. Press the TV/AV button to store the adjustment.
24 | 25 |