Product Spec.
Model |
|
|
|
| |
|
|
|
|
| |
Main body | Horizontal size | 455 mm | Thickness | 60 mm | |
|
|
|
| ||
Height | 424 mm | Weight | 6.3 kg | ||
| |||||
|
|
|
|
| |
Power requirements | DC 12V/3.0A |
|
|
| |
|
|
|
| ||
Television system | PAL/ |
|
| ||
|
|
|
| ||
Television programnme | VHF: 2~12 UHF :21~69 Cable : S1~S41 |
| |||
|
|
|
| ||
LCD Panel | LG Philips LCD 15.1” TFT LCD panel |
| |||
|
|
|
|
| |
Resolustion | XGA(1024 X 768) |
|
|
| |
|
|
|
|
| |
Power consumption | 45W |
|
|
| |
|
|
|
|
| |
External antenna impedance | 75Ω |
|
|
| |
|
|
|
|
| |
Audio output | 3W +3W |
|
|
| |
|
|
|
|
| |
Speaker output | 8Ω X 2 |
|
|
| |
|
|
|
|
| |
External input ports | • ANTENNA IN |
| • DC 12V IN |
| |
| • PC IN |
| • SCART |
| |
| • HEADPHONE JACK | • | |||
| • AV IN |
| • PC AUDIO IN | ||
|
|
|
| ||
AC Power Adaptor | AC 100~240, 50/60Hz |
|
| ||
Output : 12Vdc, 3.0A |
|
| |||
|
|
| |||
|
|
|
|
|
Troubleshooting
Problem | Check item | |
|
| |
| • Insert the AC power cord plug securely in AC power | |
No picture on screen and no sound | outlet. | |
• Make sure the remote control is not in the standby | ||
from speakers | mode (The POWER/Standby indicator is red.) | |
| • Turn on the MAIN POWER button on the top of the | |
| display. | |
|
| |
No picture/No picture from AV | • Check the brightness setting of the display. | |
• Lamp may have malfunction. | ||
terminal | • Make sure a cable with no VIDEO input signal is | |
| connected to the | |
|
| |
| • Check the sound setting. | |
Picture is displayed, but no sound | • Make sure the sound is not muted. | |
• Make sure a pair of headphones is not connected. | ||
from the speakers. | • Make sure the connectors of the optional speaker | |
| system are securely inserted. | |
| • Make sure the setting of AV OUTPUT terminal | |
|
| |
Picture is too light | • Make sure COLOR and CONTRAST settings. | |
|
| |
| • Make sure BRIGHTNESS setting is not set too low. | |
Picture is too dark. | • Check to see if BRIGHTNESS setting | |
| • Lamp may have malfunction. | |
|
| |
| • Change the batteries. | |
Remote control does not work. | • Make sure the infrared transmitter window is not | |
receiving strong light such as light from fluorescent | ||
| ||
| lamps. | |
|
| |
No picture from AV OUT terminal. | • Make sure AV INPUT is not set. | |
• Make sure the input source other than AV | ||
| ||
|
| |
The picture is not sharp. | •The reception may be weak. | |
• The state of the broadcast may also be bad. | ||
The picture moves. | • Make sure the antenna is facing the right direction. | |
| • Make sure the outside antenna is not disconnected. | |
|
| |
| • Make sure the antenna is facing the right direction. | |
The picture is doubled or tripled. | • There may be reflected electric waves from | |
| mountains or buildings. | |
|
| |
| •There may be interference from automobiles, trains, | |
The picture is spotted. | high voltage lines, neon lights, etc. | |
• There may be interference between the antenna cable | ||
| ||
| and power cable. Try positioning them further apart. | |
|
| |
| • Is the unit receiving interference from other devices? | |
| Transmission antennas of radio broadcasting stations | |
There are stripes on the screen or | and transmission antennas of amateur radios and | |
colors fade. | cellular phones may also cause interference. | |
| • Use the unit as far apart as possible from devices | |
| that may cause possible interference. | |
|
|
26 | 27 |