How to adjust the OSD (On Screen Display) screen
Pops up the | Select a menu | Select a menu icon | Adjust the status | Save | Exit from the |
menu screen | icon |
|
| adjustment | menu screen. |
•Use the remote controller to adjust the OSD screen.
1 Press the MENU Button, then the main menu of the OSD appears.
2 To access a control, use the 
Buttons.
3 When the icon you want becomes highlighted, press the SET Button.
4 Use the 
Buttons to adjust the item to the desired level.
5 | Accept the changes by pressing the SET Button. |
|
|
|
|
6 Exit the OSD by Pressing the EXIT Button.
How to adjust the screen automatically
You need to adjust the screen display when connecting the monitor to a new computer or changing the mode. Refer to the following section to set an optimal monitor screen.
Press the AUTO/SELECT button (AUTO button in a remote controller) in the PC analog signal. Then, an optimal screen status will be selected that fits into the current mode.
If adjustment is not satisfactory, you need to adjust screen position, clock and phase in the OSD menu.
ENGLISH
A20