LG Electronics L4200A Safety Precautions, Precautions in installing the Monitor

Page 4

Safety Precautions

Please read these safety precautions carefully before using the monitor.

Warning If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.

Caution If you ignore the caution message, you may be slightly injured or the product may be damaged

Precautions in installing the Monitor

Warning

Keep away from heat sources like electrical heaters.

- Electrical shock, fire, malfunction or deformation may occur.

Keep the packing anti-moisture material or vinyl packing out of the reach of children.

-Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.

Do not put heavy objects on the monitor or sit upon it.

- If the monitor collapses or is dropped, you may be injured. Children must pay particular attention.

Do not leave the power or signal cable unattended on the pathway.

- The passerby can falter, which can cause electrical shock, fire, product breakdown or injury.

Install the monitor in a neat and dry place.

- Dust or moisture can cause electrical shock, fire or product damage.

If you can smell smoke or other odors or hear a strange sound unplug the power cord and contact the service center.

- If you continue to use without taking proper measures, electrical shock or fire can occur.

If you dropped the monitor or the case is broken, turn off the monitor and unplug the power cord.

-If you continue to use without taking proper measures, electrical shock or fire can occur. Contact the service center.

Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the monitor, or inflammable objects such as paper and matches. Children must pay particular attention.

-Electrical shock, fire or injury can occur. If a foreign object is dropped into the monitor, unplug the power cord and contact the service center.

Caution

Make sure the monitor ventilation hole is not blocked. Install the monitor in a suitably wide place (more than 10cm from the wall)

- If you install the monitor too close to the wall, it may be deformed or fire can break out due to internal heat.

Do not block the ventilation hole of the monitor by a tablecloth or curtain.

- The monitor can be deformed or fire can break out due to overheating inside the monitor.

Install the monitor on a flat and stable place that has no risk of dropping the monitor. - If the monitor is dropped, you may be injured or the monitor may be broken.

Install the monitor where no EMI occurs.

Keep the monitor away from direct sunlight. - The monitor can be damaged.

A1

Image 4
Contents Color Monitor Page Table of Contents Safety Precautions Precautions in installing the MonitorInstall the monitor in a neat and dry place Keep away from heat sources like electrical heatersElectrical Power Related Precautions Precautions in Moving the MonitorFix the power cable completely Make sure to turn off the monitorPrecautions in Using the Monitor Do not shock the monitor when moving itOn Disposal Fire or electric shock accident can occurAccessories Power Cord Audio Cable PCDesktop Stand Type MonitorUsing the Remote Control Name of the Remote Controller ButtonsPIP POP on PBP FullSwap Button Inserting batteries into remote controllerTable of PIP/POP/PBP Function Support Connecting the Speakers Optional Rear View Name and Function of the PartsBack Cap Connecting the Monitor To arrange cables in orderPC B MAC Macintosh Adapter not includedMain Power Switch How to connect to two computersConnecting the VCR/DVD VCR/DVDWhen connecting with a Scart cable Monitor Video Connecting the DVD/HDTV DVDConnecting AV Outputs Name of the Buttons in the Screen Adjustment Unit Selecting and Adjusting the ScreenOSD Select Adjust Button Source Button OSD Lock/Unlock Button Menu button +OSD Menu When Connected to Your PC OSD Menu When Watching Video/DVD/HDTVHow to adjust the screen automatically How to adjust the OSD On Screen Display screenUse the remote controller to adjust the OSD screen Adjusting Screen Color Adjusting Screen CLOCK/PHASE and PositionAdjusting the audio function AVLSelecting the Options Press the button to display the submenu for OSDPIP Source To select an input signal for PIP To adjust the Pippicture in Picture of the screenPIP Size Adjusting PIP/POP/PBP Mode Multiple Screen Functions To adjust the Poppicture OUT Picture of the screenTo adjust the Pbppicture by Picture of the screen PBP TintSharpness Adjusting Screen ImageTint A28 Image SizeOSD PositionA30 A31 A32 Connecting the cable Controlling the Multiple MonitorsReset Send Command Length Flag Address Value Assign Address Send Command LengthCommand Presence Check Send Command LengthChecksum ParameterValue# 2 HEX 01h 00h 00h/OFF, 01h/ON1Bh 00h 21hTroubleshooting No image is displayedScreen image looks abnormal Audio function does not work Specifications Environmental Dimensions WeightConditions Vesa 640 x 480 Vesa 640 x 480 Vesa 800 x 600 Vesa 800 x MAC