LG Electronics DU-42PX12XD owner manual Color Temperature Command2u, PIP Input Select Command2y

Page 39

External Control Device Setup

19. Color Temperature (Command2:u)

G To adjust color temperature.

You can also adjust color temperature in the Video menu.

Transmission

[k][u][ ][Set ID][ ][Data][Cr]

Data 0: Warm 1: Medium 2: Cool

Acknowledgement

[u][ ][Set ID][ ][OK][Data][x]

20. PIP Input Select (Command2:y)

GTo select input source for sub picture in PIP/Twin pic- ture mode.

Transmission

[k][y][ ][Set ID][ ][Data][Cr]

Data 0: DTV

1:Analog

2:Video 1

3:Video 2

Acknowledgement

[y][ ][Set ID][ ][OK][Data][x]

21. ISM Method (Command2:p)

G To avoid having a fixed image remain on screen.

Transmission

[j][p][ ][Set ID][ ][Data][Cr]

Data 0: Normal

1:Orbiter

2:Inversion

Acknowledgement

[p][ ][Set ID][ ][OK][Data][x]

22. White Wash (Command2:q)

G To control the white wash function on/off.

You can also adjust white wash in Option menu.

Transmission

[j][q][ ][Set ID][ ][Data][Cr]

Data 0: White Wash off 1: White Wash on

Acknowledgement

[q][ ][Set ID][ ][OK][Data][x]

23. Orbiter Time Setting (Command2:r)

G To adjust orbiter operation time term.

Transmission

[j][r][ ][Set ID][ ][Data][Cr]

Data Min: 1 ~ Max: 64

Refer to ‘Real data mapping’. See page 37.

Acknowledgement

[r][ ][Set ID][ ][OK][Data][x]

24. Orbiter Pixel Setting (Command2:s)

G To adjust pixel number in orbiter function.

Transmission

[j][s][ ][Set ID][ ][Data][Cr]

Data Min: 0 ~ Max: A

Acknowledgement

[s][ ][Set ID][ ][OK][Data][x]

25. Channel Tuning (Command: m a)

G To tune channel to following physical/major/minor number

Transmission

[m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][ ][Data3][Cr]

Data 0: Physical channel number (Transmit by Hexadecimal code)

*NTSC air: 02 ~ 45

NTSC cable: 01, 0E ~ 7D

ATSC air: 01 ~ 45

ATSC cable: 01 ~ 87

1:Major channel number (Transmit by Hexadecimal code)

*NTSC air: 02 ~ 45, NTSC cable: 01 ~ 7D

ATSC air: 01 ~ 63, ATSC cable: 01 ~ 87

2:Minor channel number (Transmit by Hexadecimal code)

*NTSC air: 00 (must be 0), ATSC: 01 ~ FE

3:High nibble Main picture: 0, Sub picture (PIP): 1

Low nibble NTSC air: 0, NTSC cable: 1, ATSC: 2,

Example) If you want PIP channel tuned to ATSC cable (stan- dard) 30-5, the command sequence is ma 00 1e 1e 05 12.

Refer to ‘Real data mapping’. See page 37.

Acknowledgement

[a][ ][Set ID][ ][OK][Data0][Data1][Data2][Data3][x] [a][ ][Set ID][ ][NG][Data0][x]

26. Channel Add/Del (Command: m b)

G To add and delete the channels

Transmission

[m][b][ ][Set ID][ ][Data][Cr]

Data 0: Channel Delete

1: Channel Add

Acknowledgement

[b][ ][Set ID][ ][OK][Data][x] [b][ ][Set ID][ ][NG][Data][x]

27. Key (Command: m c)

G To send IR remote key code

Transmission

[m][c][ ][Set ID][ ][Data][ ][Cr]

Data Key code: Refer to page 41.

Acknowledgement

[c][ ][Set ID][ ][OK][Data][x]

*It’s impossible to command the IR Code 0x08 and 0xC4 with RS-232C.

Owner’s Manual 39

Image 39
Contents LG Electronics U.S.A., Inc Plasma TVClass B digital device FCC NoticeSafety Instructions Safety Instructions Contents Wide Screen What is a Plasma Display Panel PDP?How does it work? Wide angle range of visionFront Panel Controls ControlsConnection Options Remote Control Key Functions Number buttonsThumbstick Up/Down/Left/Right/OK Attaching the TV assembly to the wall InstallationInstallation Instructions To Install on a DesktopTo Mount on a Wall Antenna Connection Analog and Digital TV signals provided on one antennaAnalog and DTV signals provided on two separate antennas External Equipment ConnectionsCable Box VCR SetupCable TV Setup Connection OptionDVD Setup External A/V Source SetupHow to connect How to useHdstb Setup Digital Audio OutputDigital Set-top Box PC Setup Monitor Display Specifications RGB-PC / DVI-PC ModeResolution Horizontal Vertical Adjustment for screen Position, Clock, and Phase Screen Setup for PC modeOn-screen Menus Language Selection Turning on the TV just after installationTurning on the TV power cord is still connected Turning the TV OnSetup Menu Options EZ Scan Channel SearchChannel Edit DTV Signal Strength Channel Label SetupMain Picture Source Selection EZ Picture Color Temperature ControlVideo Preset Video Menu OptionsEZ Sound Audio Menu OptionsAudio Language EZ SoundRiteStereo/SAP Broadcasts Setup Manual Sound Control Off optionFront Surround BBE TV Speakers On/Off SetupFor only On timer function Auto Clock SetupManual Clock Setup On/Off Timer SetupAuto Off Sleep TimerAspect Ratio Control Option Menu FeaturesDigital Broadcasting System Captions Caption ModeCaption Analog Broadcasting System CaptionsDemo Cinema Mode SetupLow Power Split Zoom DTV/CADTV 720p, or 1080i mode onlyISM Image Sticking Minimization Method TV Rating General Lock Menu OptionsChip rating and categories TV Rating ChildrenParental Lock Setup Swapping the PIP/Twin Picture Selecting an Input Signal Source for PIP/Twin PicturePIP Picture-In-Picture / POP / Twin Picture Watching PIP/Twin PictureMoving the PIP sub picture Adjusting Main and Sub Picture Sizes for Twin PictureRS-232C Configurations External Control Device SetupRS-232C Setup Type of Connector D-Sub 9-Pin MaleTransmission / Receiving Protocol Command Reference ListSet ID Communication ParametersScreen Mute Command2d Power Command2aInput Select Command2b Main Picture Input Aspect Ratio Command2c Main picture formatOSD Select Command2l Color Command2iTint Command2j Sharpness Command2kWhite Wash Command2q Color Temperature Command2uPIP Input Select Command2y ISM Method Command2pRemote Control IR Codes How to ConnectCode Hexa Function Programming the Remote Programming a code into a remote modeVCRs Programming CodesAudio HdstbTroubleshooting Checklist Cleaning the Screen Cleaning the CabinetExtended Absence LG ELECTRONICS, INC Plasma TV U.S. Limited Warranty No 3828VA0479G b This Limited Warranty does not Apply to