• The PHASE adjustment range is -16 ~ +16.
• The CLOCK adjustment range is -30 ~ +30.
3. Press the OK button.
Initializing (Reset to original factory values) - To initialize the adjusted values
1. Press the ADJUST button and then use D / E button to select the RESET option.
2. Press the OK button and then use F / G button to select Yes.
3. Press the OK button
Installation
Operation
Screen Setup for PC mode
-Be sure to select the
-In
-You can manually adjust picture position and minimize image shaking for the PC input source.
Adjustment for screen Position, Clock, and Phase
1.Press the ADJUST button and then use D / E button to select POSITION,
CLOCK, or PHASE.
2.Press the OK button and then use D / E / F / G buttons to make appropriate adjustments.
| POSITION G |
| |
| CLOCK |
| D |
| |||
|
| F | G |
| PHASE | E | |
|
|
|
|
RESET
Adjust Close
POSITION
CLOCK
Initialize Settings
PHASE
RESET G
Adjust Close
Owner’s Manual 17