LG Electronics 60PB5600 Mounting on a table, Securing the TV to a wall optional, Local dealer

Page 12

12ASSEMBLING AND PREPARING

Mounting on a table

1Lift and tilt the TV into its upright position on a table.

-Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation.

 

10 cm(4 inches)

10 cm

10

cm

 

10 cm

 

Securing the TV to a wall (optional)

(Depending upon model)

ENGLISH

2Connect the power cord to a wall outlet.

CAUTION

yyDo not place the TV near or on sources of heat, as this may result in fire or other damage.

1Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV.

-If there are bolts inserted at the eye-bolts position, remove the bolts first.

2Mount the wall brackets with the bolts to the wall.

Match the location of the wall bracket and the eye-bolts on the rear of the TV.

3Connect the eye-bolts and wall brackets tightly with a sturdy rope or cable.

Make sure to keep the rope parallel to the flat surface.

CAUTION

yyMake sure that children do not climb on or hang on the TV.

NOTE

yyUse a platform or cabinet that is strong and large enough to support the TV securely. yyBrackets, bolts and ropes, are optional. You can obtain additional accessories from your

local dealer.

Image 12
Contents Plasma TV Important Safety Instructions EnglishEnglish YyDisconnecting the Main Power YyGroundingYyOutdoor Antenna Grounding Can differ by country YyMovingTV screen YyDot Defect For USA and CanadaYyGenerated Sound Licenses Open Source Software NoticePower Cord Stand Body Stand Sticker Assembling and PreparingUnpacking Stand Base Depending Upon modelYyHow to use the ferrite core Depending upon model Wind the PC audio cable on the ferrite core onceTo an External device To the TV Lifting and moving the TV Result in damage to the screenUsing the joystick button Adjusting the MenuBasic Functions Setting up the TV Attaching the standMounting on a table Securing the TV to a wall optionalDepending upon model Local dealerMounting on a wall ModelVesa a x B Standard screw Number of screwsConnecting to an antenna or cable Making ConnectionsOther connections USBRemote Control AudioSettings To set up the channels automaticallyTo select Picture Mode Settings Channel Auto TuningTo use Energy Saving feature To return to initial settingsTo set the password To set additional picture optionsTo see WEB Manual Supported Audio FormatsMenu Eject USB Specifications External Control Device Setup Hdmi PC supported modeHdmi DTV supported mode Component port connecting informationMaintenance TroubleshootingCleaning your TV Power cordChild Safety Canada Declaration of Conformity