APPENDIX
TROUBLESHOOTING
The TV does not operate properly
The remote control
does not work
Power is suddenly
turned off
■Check to see if there is any object between the TV and the remote control caus- ing an obstruction.
■Are batteries installed with correct polarity (+ to +, - to
■Correct remote operating mode set: TV, VCR etc.?
■Install new batteries.
■Is the sleep time set?
■Check the power control settings. Has the Power supply been interrupted.
■Is Auto sleep activated on this station.
The video function does not work.
No picture &
No sound
Picture appears slow- ly after switching on
No or poor colour
or poor picture
■Check whether the TV is switched on.
■Try another channel. The problem may be with the broadcast.
■Is the power cord inserted correctly into the mains?
■Check your antenna direction and/or location.
■Test the mains outlet by plugging another TV into the same outlet.
■This is normal, the image is muted during the TV startup process. Please contact your service center, if the picture has not appeared after five minutes.
■Adjust Colour in menu option.
■Allow a sufficient distance between the TV and the VCR.
■Try another channel. The problem may be with the broadcast.
■Are the video cables installed properly?
■Activate any function to restore the brightness of the picture.
APPENDIX
Horizontal/vertical
bars or picture shaking
Poor reception on
some channels
Lines or streaks in
pictures
■Check for local interference such as an electrical appliance or power tool.
■Station or cable channel experiencing problems, tune to another station.
■Station signal is weak, reposition the antenna to receive weaker stations.
■Check for sources of possible interference.
■Check antenna (Change the position of the antenna).
76
Downloaded From