PROGRAMMING THE REMOTE CONTROL
The remote control is a multi brand or universal remote. It can be programmed to operate most remote controlled devices from other manufacturers.
Note that the remote control may not control all models from other brands.
Programming a code into a remote mode
1Testing your remote control.
To find out whether your remote control can operate other components without programming, turn on a component such as a VCR and press the corresponding mode button (such as a DVD or VCR(or STB)) on the remote control, while pointing at the component. Test the POWER and PR + / - buttons to see if the component responds correctly. If the component does not operate correctly, the remote control requires programming to operate the device.
2Switch on the component to be programmed, then press the corresponding mode button (such as a DVD or VCR(or STB)) on the remote control. The remote control button of the desired device is illumintated.
3Press the MENU and MUTE buttons simultaneously, the remote control is ready to be programmed with the code.
4Enter a code number using the number buttons on the remote control. Programming code numbers for the corresponding component can be found on the following pages. If the code is correct, the device will turn off.
5
6
Press the MENU button to store the code.
Test the remote control functions to see if the component responds correctly. If not, repeat from step 2.
APPENDIX
81
Downloaded From